Panasonic SF4D Series Скачать руководство пользователя страница 11

Страница: 11 / 176

Introduction

1-2 Applicable Standards / Regulations

This device complies with the following standards and regulations.

<EU Directives>

EU Machinery Directive 2006/42/EC

EMC Directive 2014/30/EU

RoHS Directive 2011/65/EU

<European Standards>

EN 61496-1/2 (Type 4), EN 55011, EN 61000-6-2, EN 50178

EN ISO 13849-1: 2015 (Category 4, PLe)

<International Standards>

IEC 61496-1/2 (Type 4), ISO 13849-1: 2015 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)

<Japanese Industrial Standards (JIS)>

JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)

<Standards in US / Canada>

ANSI/UL 61496-1/2 (Type 4)

CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2

<Regulations in US>

OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA 15.06

For Machinery Directive, type certification a Notified Body TÜV SÜD has been acquired.

For the standards in US / Canada,

TÜV

mark by a Notified Body TÜV SÜD has been ac

quired.

<Standards in China>

GB 4584

<Standards in Korea>

S1-G-1-2009, S2-W-5-2009

The S-mark certification certified by Korea Occupational Safety & Health Agency (KOSHA) has

been acquired.

<Reference>

The conformance of this device to JIS, OSHA and ANSI is based on our self-evaluation.

The

TÜV

mark

indicates that this device conforms to the NRTL certification (such as UL) in

the US and CSA certification in Canada.

The mark shown on the product indicates that this device has acquired the S-mark.

WARNING

●

Since this device has not received “Type Examination” in Article 44-2 of the Industrial Safety and

Health Act, it cannot be used in Japan as the “Safety device for press machine and shearing

machine” specified in Article 42 of the said law.

● Before using this device in a target region other than the above, be sure to confirm the stan

dards / regulations applied in the relevant nation and region.

Содержание SF4D Series

















































































































































































Результаты поиска

Содержание SF4D Series

Отзывы:

Бренды по названию

Популярные бренды

Panasonic SF4D Series, Инструкция по эксплуатации

Результаты поиска

Содержание SF4D Series

Отзывы:

Бренды по названию

Популярные бренды