© Panasonic Industrial Devices SUNX Co., Ltd. 2017
82
Function
<Output operations of muting sensors (when setting to NONC)>
Muting
input
Operation at
ON state
Operation at
OFF state
NO (Normally Open) type
ON with light non-received status (photoelectric sensor, etc.)
ON with object approaching status (inductive proximity sensor, etc.)
ON with object contacted status (position switch, etc.)
A
Output
0V or +V
Open
NC (Normally Closed) type
ON with light received status (photoelectric sensor, etc.)
ON with object non-approaching status (inductive proximity
sensor, etc.)
ON with object non-contacted status (position switch, etc.)
B
Notes: 1) If a beam channel whose muting function is set to be invalid is blocked during the muting, the
control output (OSSD 1 / 2) will be turned OFF and the muting function will be released.
2) The muting indicator diagnosis function can be set with the handy controller Ver. 2.1 (
SFB-HC
)
(optional), but it must be set to invalid. If the muting indicator diagnosis function is set to valid,
the muting function cannot be used.
3)
Although the muting indicator diagnosis function will be valid when the handy controller (
SFB-HC
)
(optional) initialization function is used, change the setting to invalid for the function if you are
using the muting function.
4) Selectable with the handy controller Ver. 2.1 (
SFB-HC
) (optional).
5) The muting function will be invalid if the muting sensor which is connected to the muting input
of this device differs from the output operation which is set with the handy controller (
SFB-HC
)
(optional).
●
Override setting changing function (For SF4B-□CA-J05 only)
Maximum continuous effective time set at the override function can be changed.
The maximum continuous effective time can be set in the range of 60 to 600 sec. (in units of
10 sec.).
Note: Selectable with the handy controller Ver.2.1 (
SFB-HC
) (optional).
●
Protective function
Unless the password is inputted, any change in setting of the device is not allowed.
The factory setting is set to be invalid for the protective function.
