Panasonic SF2B Series, Инструкция по эксплуатации

Страница: 16 / 30

© Panasonic Industrial Devices SUNX Co., Ltd. 2016
- 16 -
<Reference>
There is no difference in the cable for series connection for the emitter and the receiver.
The length of the cable for series connection differs depending on the model No.
Model No. Cable Length (m)
SF2B-CSL01 0.1
SF2B-CSL05 0.5
<Dismantling the cable for series connection>
1. For dismantling the cable for series connection, follow the above procedure of
<Constructing method for the series connection> in reverse.
•
The cable for series connection ( SF2B-CSL
□
) cannot be extended.
•
When the cable for series connection ( SF2B-CSL
□
) is inserted to the main
sensor ( SF2B-
□
) and the sub sensor (this device), take care of the following.
If inserted without care, the connector pins may bend.
1) Do not pull the cables before tightening the M3 screws.
2) Do not insert the connector incorrectly and tighten the M3 screws.