70
VQT2N91
2
Dividing a scene to
partially delete
This divides the recorded scenes in two and deletes the front half or back half.
/
¬
Change the mode to
, and switch play mode selection to [VIDEO/Built-
inMemory] (
/
¬
Change the mode to
, and switch play mode selection to [VIDEO/HDD]
1
Select the menu. (
23)
2
Select the scene to be divided,
then press the joystick.
3
When you reach the point where you
want to divide the scene
Select [
] with the joystick.
≥
Move the joystick left or right to fast
forward/rewind playback.
≥
Using slow-motion playback or frame-by-
frame playback makes it easy to search
for the point where you want to divide the
scene. (
61)
4
Select the half that you want to
delete and press the joystick.
5
Select [YES], then press the
joystick to play back the part to
be deleted.
≥
When you stop the playback, the
confirmation message appears.
≥
When [NO] is selected, the confirmation
message appears.
Proceed to step 6.
6
Select [YES], then press the
joystick.
To continue dividing and deleting
other scenes
To complete editing
Press the MENU button.
≥
It is impossible to divide and delete
scenes with a short recording time. The
length of the remaining scenes must be
3 seconds or longer.
≥
It is impossible to set the dividing point at
the beginning or the end of the scene.
≥
When a scene that was divided and
deleted using the SPLIT&DELETE
function is copied to a disc using the DVD
burner or the supplied software and
played back on another device, a
maximum of about 1 second of the
deleted part may be played back.
≥
The actual division may slightly slip off the
previously designated dividing point.
SDR-T55
SDR-T50
SDR-H95
SDR-H85
[EDIT SCENE]
#
[SPLIT&DELETE]