107
VQT2L14
Problem
Check points
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
≥
Remove the battery or AC adaptor, wait about
1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute later, turn on the
power again. (Conducting the above operation while
the media is being accessed may damage the data
on the media.)
≥
If normal operation is still not restored, detach the
power connected, and contact consumer support.
(
l
124, 125)
The remaining time
indication or the
elapsed time
indication is not
shown.
≥
If you set [SETUP]
>
[DISPLAY]
>
[OFF],
indications other than warnings and date etc. are not
displayed. (
l
29)
The unit arbitrarily
stops recording.
≥
Use an SD card that can be used for motion picture
recording. (
l
23)
≥
The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card, built-in memory or HDD (
l
76)
≥
If the unit is exposed to strong vibrations or shocks
while recording on HDD, recording may stop to
protect the HDD. If the unit is used in a place with
loud sounds, the recording may stop due to sound
vibrations. Recording data on an SD card is
recommended in these places.
Auto focus function
does not work.
≥
Set the Intelligent Auto Mode to on.
≥
If you are trying to record a scene which is hard to
bring into focus in Auto Focus Mode, use the Manual
Focus Mode to adjust the focus. (
l
36, 61)
Color balance of
images is strange
when recording in a
place such as a
gymnasium.
≥
In a place with multiple light sources, such as a
gymnasium or a hall, set the white balance setting to
(Indoor mode2). If you cannot record clearly
with the
(Indoor mode2), set it to
(Manual
adjustment mode). (
l
59)
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 107 ページ ２００９年１２月２２日 火曜日 午前１０時３３分
Содержание SDR-H85P/PC
Страница 131: ...131 VQT2L14...
