Panasonic SDR-H100EB, Руководство по обслуживанию

Страница: 61 / 98

S-47
INITIAL/LOGO ABBREVIATIONS
FBAL Focus Balance
FC Saw Tooth Signal In
FCLK Frame Clock
FCO Saw Tooth Signal Generator
FE Focus Error
FENC Focus Encoder
FEND Frame End Pulse
FEO Focus Error AMP Output
FFI Focus Error AMP Inverted Input
FG Frequency Generator
FLICK Flicker Output
FM Field Memory
FMCO0-3 Field Memory Chrominance Out
FMDIR Focus Motor Direction
FMOEM Field Memory Enable
FMOEO Field Memory Enable
FMT1-4 Focus Motor Terminal
FMY00-07 Field Memory Luminance Out
FMYI0-07 Field Memory Luminance In
FNO F Value
FPS Frame Refference Signal
FRP Frame Refference Pulse
FRPSO Frame Start Pulse
FSC Frequency Sub Carrier
FSCK FS (384 Over Sampling) Clock
G G1, G2, G3 Gap 1,2,3
GCA Gain Control AMP
GCNT Gain Control
G-CNT AGC Adjustment
GCTRL Gain Control
GENE Generator
GND Common Grounding (Earth)
GSW Ground for Switching Power
H H1, 2 H CCD Drive Pulse
HA0- Host Address
HALL IN(+), (-) Input Signal from Hall IC
HAP Horizontal Aperture
HB Hall Bias
HBR SET High Brightness Set
HBRST High Brightness Set
HCLR High Clear
HCP Shift Clock for Horizontal Drive
HD Horizontal Drive Pulse
HD0-7 Host Data
HDTV High Definition TV
HEX Hexadecimal
HG Hall Gain
HINT Host Interrupt
HLT High Bright Signal
HP Headphone
HPF High Pass Filter
HRXW Host Read/Write
HSE Modulated Data Output