Panasonic SCPM53 - HES MICRO SYSTEM, Руководство по эксплуатации

Страница: 12 / 16

RQTV0102
12
Timer (Continued)
Other basic operations Other basic operations
To Action
change the settings Repeat steps 1 to 4 and 6 on page 11.
change the source
or volume
1) Press [
˚
PLAY/REC] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6 on page 11.
check the settings
(when the unit is on
or in standby mode) Press [CLOCK/TIMER] repeatedly to
select
˚
PLAY or
˚
REC.
cancel Press [ ˚ PLAY/REC] to clear the timer
indicators from the display.
Note
• The play timer and record timer cannot be used together.
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes on,
the system turns on and engages MUSIC PORT as the source. If
you wish to playback or record from the portable audio equipment,
activate the equipment
ʼ s play mode and increase the volume. (See
the portable audio equipment ʼ s instruction manual.)
Sound adjustment
Selecting sound effects Selecting sound effects
You can change the sound effect by selecting Preset EQ or
adjusting the bass or treble effect.
Preset EQ Preset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
HEAVY
→
CLEAR
→
SOFT
→
VOCAL
→
EQ-OFF
Setting Effect
HEAVY Adds punch to rock
CLEAR Clari fi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF No effect
Bass or treble Bass or treble
Enable you to enjoy the lower or higher pitch sound.
1 Press [BASS] or [TREBLE] to select your desired
setting.
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2 Press [
5
] or [
∞
] to adjust the level.
OR
To adjust bass or treble using the main unit.
Turn [BASS] or [TREBLE] clockwise to increase the
level.
Turn [BASS] or [TREBLE] counter-clockwise to decrease
the level.
Note
The tone level can be varied within -3 to +3.
RQTV0102_1B.indd 12 RQTV0102_1B.indd 12 2/6/06 12:01:10 PM 2/6/06 12:01:10 PM