26
RQT7372
Speci
fi
cations
g
AMPLIFIER SECTION
FTC output power, both channels driven
10% Total harmonic distortion
60 Hz to 3 kHz
(
Low channel)
26 W per channel (6
Ω
)
3 kHz to 16 kHz
(High channel)
29 W per channel (6
Ω
)
Total Bi-Amp power
55 W per channel
RMS output power, both channels driven
10% Total harmonic distortion
1 kHz (
Low channel)
35 W per channel (6
Ω
)
8 kHz
(High channel)
35 W per channel (6
Ω
)
Total Bi-Amp power
70 W per channel
Output Impedance
HEADPHONE
16 to 32
Ω
g
FM TUNER SECTION
Frequency range
87.5 to 108.0 MHz (0.1 MHz steps)
87.9 to 107.9 MHz (0.2 MHz steps)
Sensitivity
1.5 µV (IHF)
S/N 26 dB
1.5 µV
Antenna terminal
75
Ω
(unbalanced)
g
AM TUNER SECTION
Frequency range
520 to 1710 kHz
Sensitivity
S/N 20 dB (at 1000 kHz)
560 µV/m
g
CASSETTE DECK SECTION
Track system
4-track, 2 -channel
Heads
Record/playback
Solid permalloy head
Erasure
Double gap ferrite head
Motor
DC servo motor
Recording system
AC bias 100 kHz
Erase system
AC erase 100 kHz
Tape speed
4.8 cm/s
Overall frequency response
(+3 dB, -6 dB at DECK OUT)
NORMAL (TYPE I)
35 Hz to 14 kHz
S/N
45 dB (A weighted)
Wow and
fl
utter
0.16% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
Note
1. Speci
fi
cations are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. The labels “HIGH (HF)” and “LOW (LF)”
on the rear of the speakers refer to High
frequency and Low frequency.
When moving the
unit
1. Remove all discs.
2. Press [
8
,
POWER] to turn
the unit off.
3. Disconnect the AC power
supply cord.
Maintenance
For a cleaner crisper sound
Clean the heads regularly to assure
good quality playback and recording.
Use a cleaning tape (not included).
To clean this unit, wipe with a soft,
dry cloth.
•
Never use alcohol, paint thinner or
benzine to clean this unit.
•
Before using chemically treated
cloth, read the instructions that
came with the cloth carefully.
This product may receive radio interference
caused by mobile telephones during use.
If such interference is apparent, please
increase separation between the product
and the mobile telephone.
g
CD SECTION
Discs played
12- and 8-cm CDs (including CD-R/RW)
recorded with CD-DA, MP3, WMA, and
HighMAT
Sampling frequency
CD
44.1 kHz
MP3/WMA
32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3:
32 kbps to 320 kbps
Decoding
16 bit linear
Pickup
Beam source
Semiconductor laser
Wavelength
780 nm
Number of channels
Stereo
Frequency response
20 Hz to 20 kHz (+1, -2 dB)
Wow and
fl
utter
Below measurable limit
Digital
fi
lter
8 fs
D/A converter
MASH (1 bit DAC)
g
SPEAKER SECTION
Type
2 way 2 speaker system
Speaker(s)
Full range
10 cm (4
"
)
Tweeter
6 cm (2
3
/
8
")
Impedance
6
Ω
Input power (IEC)
LOW
70 W (Max.)
HIGH
70 W (Max.)
Sound pressure level
81 dB/W (1.0 m)
Cross over frequency
3.0 kHz
Frequency range
45 Hz - 50 kHz (-16 dB)
55 Hz - 45 kHz (-10 dB)
Dimensions (W
x
H
x
D)
151 x 250 x 229 mm
(5
15
/
16
"
x 10
7
/
8
"
x 9
"
)
Mass
1.93 k
g
(4.3 lbs)
g
GENERAL
Power supply
AC 120 V, 60 Hz
Power consumption
130 W
Dimensions (W
x
H
x
D)
179 x 250 x 383 mm
(7
1
/
16
"
x 9
27
/
32
"
x 15
3
/
32
"
)
Mass
5.44 k
g
(11.99 lbs)
Power consumption in standby mode:
Approx. 0.9 W
Product Service
1. Damage requiring service -
The unit should be serviced by
quali
fi
ed service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing -
Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other
servicing to authorized servicing personnel.
3. Replacement parts -
When parts need replacing ensure the
servicer uses parts speci
fi
ed by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in
fi
re, electric shock, or other hazards.
4. Safety check -
After repairs or service, ask the servicer to
perform safety checks to con
fi
rm that the unit is in proper working
condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the
entire system.
Product information
For product information or assistance with product operation:
In the U.S.A.,
refer to “Customer Services Directory” on page 27.
For assistance in the continental U.S.A. in obtaining repairs please
ship the product to:
Panasonic Services Company - Customer Servicenter
Suite B 4900 George McVay Drive, MacAllen, TX 78503
In Puerto Rico contact the Panasonic Sales Company.
Tel. (787) 750-4300 Fax. (787) 768-2910
When shipping the unit carefully pack and send it prepaid,
adequately in sured and preferably in the original carton. Include a
letter detailing the complaint and provide a day time phone number
where you can be reached.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD
THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY
UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Also, the purchaser will be responsible for shipping the unit to the
above address.
In Canada,
contact Panasonic Canada Inc. Customer Care Cen tre
at 905-624-5505, or visit website (www.panasonic.ca), or an
authorized Servicentre close to you.
Reference
Содержание SCPM29 - MINI HES W/CD PLAYER
Страница 27: ...27 RQT7372 Warranty U S A Reference ...