Getting started
Precautions
RQT9772
11
Step 2 Placement
Supplied accessories
Additionally required accessories (commercially available)
≥
Fall prevention cord .....................................................................................................................
k
2
≥
Screw eyes (to attach the fall prevention cord).............................................................................
k
2
≥
Use commercially available screws that are capable of supporting over 33 k
g
.
≥
Use a cord that is capable of supporting over 33 k
g
(with a diameter of about 1.5 mm).
Attach the cord to the main unit.
When placing the main unit
in a rack or on a table
≥
Place the main unit on a flat and horizontal surface.
∏
2 Basic stands
∏
2 30
o
stands
∏
2 80
o
stands
∏
2 Screws with washer
A
Cord*
* If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm apart from the tip, at an angle of 45
o
(as
illustrated above).
SC-HTB170EGEBGN_RQT9772-B.book 11 ページ ２０１３年２月４日 月曜日 午前９時５分
