2
Placement of speakers
You can remove the speaker cover.
Note
• Keep your speakers at least 10 mm away from the system for proper ventilation.
• These speakers do not have magnetic shielding. Do not place them near
televisions, personal computers or other devices easily influenced by
magnetism.
• To avoid damage to the speakers, do not touch the speaker cones if you
have taken the covers off.
Connections
Caution
• Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.
• Do not attach these speakers to walls or ceilings.
3 AC mains lead
1 Speakers
Before connecting, twist off
the tip.
R
L
1
2
Red
Red
Black
Black
Copper (+)
Copper (+)
Silver (–)
Silver (–)
2 AM loop antenna
Stand the antenna up on its base.
Use
Note
• An analog player with a built-in phono equalizer can be
connected.
• For details, refer to the instruction manual of the other equipment.
Reduce the volume before connection.
Plug type: 3.5 mm stereo
Note
Avoid listening for prolonged periods of
time to prevent hearing damage.
Start Playback from the other
source.
Connect the AC mains lead only
after all other connections have
been made.
Note
If the unit is left unplugged for longer
than approximately two weeks, all
settings will revert to the factory
settings. Remember to reset the
radio stations and any other
memory items before using the unit
again.
AUX
OUT
(R)
(L)
Tape deck, etc.
PHONES
Headphones
(Not included)
Other equipment
(Cords and equipment not included.)
Plug type:
3.5 mm stereo
Select “AUX”
Remote control
To household
mains socket
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 7
BEFORE CONNECTION.
Use the numbers indicated in parentheses when asking for
replacement parts.
As of December 2004
Supplied accessories
1 Remote control
(EUR7711170)
2 Batteries
1 AC mains lead
(RFA2699)
(RFA2700)
(RJA0019-D)
1 AM loop antenna
(G0ZZ00002036)
Note
The included AC mains lead is for use with this unit only. Do not use it
with other equipment.
The remote control
Remote control signal sensor
3
2
1
4
(R6, AA)
g
Batteries
• Insert so the poles (+ and –)
match those in the remote
control.
• Do not use rechargeable type
batteries.
g
Use
• Aim at the sensor, avoiding obstacles, at a
maximum range of 7 m directly in front of the
unit.
• Operation can be affected by strong light
sources, such as direct sunlight, and the
glass doors on cabinets.
For the United Kingdom
For other areas
For continental Europe