23
Recording operations
RQT5539
1
2
3
5
6
1
2
6
3
2
5
1
Tape direction
Recording from compact discs
1
Press [
c
DECK 2 OPEN], and insert the tape.
Close the holder by hand.
Tape direction is automatically set to “
3
”.
2
Press [REV MODE] to select the reverse mode.
Every time you press the button:
: One side is recorded, then recording stops auto-
matically.
,
: Both sides (front side
→
reverse side) are
recorded, then recording stops automatically.
3
Press [CD].
4
Insert CD in the tray.
(Perform steps
1
~
2
on page 15).
5
Press [(CD 1) ~ (CD 5)] to select the disc you want.
Pressing [
L
] will stop playback.
6
Press [
a
REC/STOP] to start recording.
•
If you selected “
,
” in step
2
, the direction will
automatically change to “
” when recording starts.
•
The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final
disc (page 15).
•
The tape deck stops automatically when the CD is finished.
To stop recording
•
To add a 4 second silent interval before stopping
Press [
L
]. The CD will stop automatically too.
•
To stop recording without a silent interval
Press [
a
REC/STOP]. The CD will stop automatically too.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [
/
] and immediately thereafter [
L
]. The tape direction will
be shown as “
4
”.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks
1. After step
4
, program the track you want (perform steps
2
~
6
on
page 17).
2. Press [
a
REC/STOP] to start recording.
