Panasonic SC-PMX90, Руководство пользователя

Страница: 8 / 20

T
Q
B
M
036
0
8
1
Press [ ] to select “BLUETOOTH”.
“READY” is indicated on the display.
2
Select “SC-PMX90” from the Bluetooth ® device’s
Bluetooth
®
menu.
The name of the connected device is indicated on
the display for a few seconds.
3
Start playback on the Bluetooth ® device.
Note:
• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest will be replaced.
• This unit can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this unit
will automatically try and connect to the last connected
Bluetooth
®
device. (“LINKING” is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
You can change the transmission mode to prioritize
transmission quality or sound quality.
Preparation
• Press [ ] to select “BLUETOOTH”.
• If a Bluetooth ® device is already connected, disconnect
it.
1
Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2
Press [ 2 , 1 ] to select the mode and then press
[OK].
MODE 1
: Emphasis on connectivity
MODE 2 : Emphasis on sound quality
Note:
• Select “MODE 1” if the sound is interrupted.
• When enjoying video contents with this function, the video
and audio output may not be synchronised. In this case,
select “MODE 1”.
• The factory default is “MODE 2”.
If the sound input level from the Bluetooth
®
device is too
low, change the input level setting.
Preparation
• Connect a Bluetooth
®
device.
1
Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
2
Press [
2
,
1
] to select the level and then press [OK].
“LEVEL 0” ,. “LEVEL i 1” ,. “LEVEL i 2”
^--------------------------------------------J
Note:
• Select “LEVEL 0” if the sound is distorted.
• The factory default is “LEVEL 0”.
1
While a Bluetooth
®
device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2
Press [
2
,
1
] to select “OK? YES” and then press
[OK].
Note:
• You can also disconnect the Bluetooth ® device by pressing
and holding [ -PAIRING] on the unit.
• The Bluetooth ® device will be disconnected if a different
audio source (e.g., “CD”) is selected.
When “SC-PMX90” is selected from a paired Bluetooth
®
device’s Bluetooth
®
menu, this unit will turn on
automatically from standby mode and establish a
Bluetooth
®
connection.
1
Press [SETUP] repeatedly to select
“BLUETOOTH STANDBY”.
2
Press [ 2 , 1 ] to select “ON” and then press [OK].
Note:
• To turn the function off, select “OFF” in step 2.
• The factory default is “OFF”. If this function is set to “ON”,
the standby power consumption will increase.
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
Other trademarks and trade names are those of their respective
owners.
Connecting a paired Bluetooth
®
device
Bluetooth
®
transmission mode
Bluetooth ® input level
Disconnecting a Bluetooth ® device
Bluetooth ® standby
SC-PMX90PC-TQBM0360_eng.book 8 ページ ２０１９年２月２１日 木曜日 午後１２時１３分