8
RQT7357
Listening operations
The radio: manual tuning
1
Press [TUNER/BAND] to select “FM” or “AM”.
The unit comes on automatically.
Every time you press the button:
FM
AM
2
Press [PLAY MODE] on the remote control to se-
lect the manual tuning mode.
MANUAL
PRESET
3
Press [
4
4
4
4
4
/REW/
4
] or [
3
3
3
3
3
/FF/
¢
] to select the fre-
quency of the required station.
“TUNED” is displayed when a radio station is tuned.
“
ST
” is displayed when a stereo FM broadcast is being
received.
4
Adjust the volume.
Auto tuning
Press and hold [
4
4
4
4
4
/REW/
4
] or [
3
3
3
3
3
/FF/
¢
] for a moment until
the frequency starts changing rapidly. The unit begins auto
tuning, stopping when it finds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [
4
4
4
4
4
/REW/
4
] or [
3
3
3
3
3
/FF/
¢
] once
again.
A
If noise is excessive in FM
Press and hold [PLAY MODE] to display “MONO”.
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press and hold [PLAY MODE] again to cancel the mode.
“MONO” goes out. MONO is also cancelled if the frequency is
changed.
Turn off “MONO” for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
B
FM allocation setting
By main unit only
This system allows you to receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
1
Press [TUNER/BAND] to select “AM”.
2
Press and hold [TUNER/BAND].
After a while the display flashes with the current minimum
frequency.
3
Continue to hold [TUNER/BAND] down.
When the minimum frequency changes, release the button.
To cancel, repeat the above steps.
Notes
• After changing the setting, previously preset frequency will
be cleared.
• Sound is momentarily interrupted if you load/unload a cassette
while listening to an AM broadcast.
4
1
3
2
1
TUNER BAND
2
PLAY MODE
3
REW
FF
4
A
PLAY
MODE
B
TUNER/BAND
RQT7357-C_08-12_EN
12/1/04, 11:34 am
8
