9
RQ
T0
B
18
9
Sleep timer
The sleep timer switches off the system after the set time.
1
Press [SETUP] repeatedly to select “SLEEP”.
2
Press [
R
,
T
] to select the setting (in minutes) and
then press [OK].
To cancel, select “OFF”.
Note:
• The remaining time is shown for a few seconds every
minute.
“SLEEP 1”
is always shown when only 1 minute
remains.
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
Sound effects
1
Press [SOUND] repeatedly to select the sound
effect.
2
Press [
R
,
T
] to select the setting and then press
[OK].
Note:
Changed settings will be kept until it is changed again, unless
otherwise indicated.
Saving the sound settings
You can save the current sound effects (up to
3 combinations).
Preparation
Select the sound effects.
1
Press [SETUP] to select “SAVE MY SOUND”.
2
Press [
R
,
T
] to select a sound setting number and
then press [OK].
“SAVED” is shown.
The new setting replaces the one existing in the same
sound setting number.
To recall the setting
1
Press [SOUND] to select “MY SOUND”.
2
Press [
R
,
T
] to select the sound setting number
and then press [OK].
Others
Auto off
This system automatically switches off when you do not
use it for 20 minutes.
1
Press [SETUP] repeatedly to select “AUTO OFF”.
2
Press [
R
,
T
] to select “ON” and then press [OK].
To cancel, select “OFF”.
Note:
This function does not work when you are in radio source or
when a Bluetooth
®
device is connected.
Bluetooth
®
standby
This function automatically switches on the system when
you establish a Bluetooth
®
connection from a paired
device.
1
Press [SETUP] repeatedly to select
“BLUETOOTH STANDBY”.
2
Press [
R
,
T
] to select “ON” and then press [OK].
To cancel, select “OFF”.
Checking the software version
1
Press [SETUP] repeatedly to select “SW VER.” and
then press [OK].
The software version is shown.
2
Press [OK] again to exit.
MY SOUND
“SOUND 1”, “SOUND 2” or “SOUND 3”
(
Z
“Saving the sound settings”)
PRESET EQ
“HEAVY” (default), “SOFT”, “CLEAR”,
“VOCAL” or “FLAT”
BASS
–4 to +4 (default: 0)
Using the main unit
1. Press [BASS/TREBLE] to select
“BASS”.
2. Press [
2
/
3
] or [
5
/
6
].
TREBLE
–4 to +4 (default: 0)
Using the main unit
1. Press [BASS/TREBLE] to select
“TREBLE”.
2. Press [
2
/
3
] or [
5
/
6
].
D.BASS
“ON D.BASS” (default) or “OFF D.BASS”
Using the main unit
Press [D.BASS] repeatedly.
SURROUND “ON SURROUND” or
“OFF SURROUND” (default)
ENGLISH
RQT0B18-R.book Page 9 Friday, January 22, 2016 10:13 AM
