RQTV0212
11
Changing the Auto scan
Changing the Auto scan
frequency range
frequency range
Only the frequencies currently used in the UK as of January
2007 on BAND
III
are Auto scanned (“United Kingdom”,
factory setting).
Select “ALL BAND
III
” when you want to store stations on
other frequencies to memory.
1
Press [DAB MENU] to enter menu mode.
2
Within 10 seconds, press [ALBUM
or
] to
select “DAB SCAN MODE” and then press [ENTER].
3
Within 10 seconds, press [ALBUM
or
] to
select “UNITED KINGDOM” or “ALL BAND
III
” and
then press [ENTER].
Auto scan begins automatically after the change has been
made.
To exit
Press [DAB MENU] again
Note
When the “DAB SCAN MODE” is changed, the DAB preset channels
are erased and if the DAB play timer has been set the timer switches
to off.
Checking the DAB signal quality
Checking the DAB signal quality
To improve reception by adjusting the antenna while
monitoring signal quality on the display.
1
Press [DAB MENU] to enter menu mode.
Note
“Scan Failed.”appears if no stations are memorized. If this occurs,
adjust the antenna and try Auto scanning or change the Auto scan
frequency range.
2
Within 10 seconds, press [ALBUM
or
] to
select “SIGNAL QUALITY” and then press [ENTER].
3
Press [ALBUM
or
] to select the frequency.
Frequency block
Reception quality
0 (poor) − 8 (excellent)
Frequency
To exit
Press [DAB MENU] again.
Note
In order to enjoy the new stations after adjusting the antenna, it is
necessary to perform Auto scanning to update the station memory.
PM4DB_EB.indd 11
PM4DB_EB.indd 11
2/1/07 4:56:49 PM
2/1/07 4:56:49 PM
