12
R
Q
T9979
12
Radio
Preparation
Press [CD/RADIO/AUX] to select “FM” or “AM”.
Manual tuning
Press [
3
] or [
5
] to tune in to the station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
“STEREO” is shown when a stereo broadcast is being
received.
Using the main unit
1
Press [TUNE MODE] to select “MANUAL”.
2
Press [
2
/
3
] or [
5
/
6
] to tune in to the
station.
Memory presetting
You can preset up to 30 FM and 15 AM stations.
█
Automatic presetting
1
Press [AUTO PRESET] to select “LOWEST” or
“CURRENT”.
2
Press [OK] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [
8
].
█
Manual presetting
1
Press [
3
] or [
5
] (main unit: [
2
/
3
] or
[
5
/
6
]) to tune in to the station.
2
Press [OK].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
█
Selecting a preset station
Press the numeric buttons, [
2
] or [
6
] to select
the preset station.
Using the main unit
1
Press [TUNE MODE] to select “PRESET”.
2
Press [
2
/
3
] or [
5
/
6
] to select the preset
station.
Improving the sound quality
When “FM” is selected
1
Press [PLAY MENU] to select “FM MODE”.
2
Press [
Y
,
U
] to select “MONO” and then press
[OK].
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency.
To memorise the setting
Continue with step 2 of “Manual presetting”.
When “AM” is selected
1
Press [PLAY MENU] to select “BEATPROOF”.
2
Press [
Y
,
U
] to select the setting that provides the
best reception and then press [OK].
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
1
Press [CD/RADIO/AUX] to select “FM” or “AM”.
2
Press and hold [CD/RADIO/AUX].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• Preset frequencies are erased after you change the
setting.
LOWEST
Tuning begins from the lowest
frequency.
CURRENT
Tuning begins from the current
frequency.
MAX8000_6000GS.book Page 12 Tuesday, March 24, 2015 4:28 PM
offset printing
