Getting started
VQT5J46
15
Precautions
Make sure that the screw used and the wall are strong enough to support the weight of at least 33 k
g
.
The screws and other items are not supplied as the type and size will vary with each installation.
≥
Refer to step 3 for details about the required screws.
≥
Be sure to attach the fall prevention cord as a secondary safety measure.
Additionally required accessories (commercially available)
≥
Screws for wall mounting .............................................................................................................
k
2
≥
Fall prevention cord......................................................................................................................
k
1
≥
Screw eye (to attach the fall prevention cord) ..............................................................................
k
1
≥
Use a cord that is capable of supporting over 10 k
g
(with a diameter of about 2 mm).
Slide the MULTI ANGLE switch to “WALL MOUNT”.
Attach the cord to the main unit.
A
Cord
§
§
If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm apart from the tip, at an angle of 45
o
(as
illustrated above).
When attaching the main unit to a wall
SC-HTB18_EB_VQT5J46.book 15 ページ ２０１４年３月１９日 水曜日 午前９時４７分
