5
RQT9708
EN
GL
IS
H
Control reference guide
Remote control
1
Turn this unit on or off
2
Select the audio source
3
Basic playback control buttons
4
Enter setup menu
5
Enter the iPod/iPhone menu /
Change displayed information
6
Open/close the sliding door
7
Adjust the volume
8
Mute the sound
Mutes the sound. Press again to
cancel. “MUTE” is also canceled
when the volume is adjusted or the
unit is turned off.
9
Enter playback menu
10 Enter sound menu
11 Selection/OK
∫
Preparation
Remove the insulation sheet
A
before using.
∫
To replace a button-type battery
1
While pressing the stopper
B
,
pull out the battery holder.
2 Set the button-type battery
with its (
i
) mark facing
upward and then put the
battery holder back in place.
Keep the button-type battery out
of reach of children to prevent
swallowing.
Battery type: CR2025 (Lithium battery)
≥
The battery should normally last about 1 year, however this depends on how
frequently the unit is used.
Main unit
1
Standby/on switch [
Í
/I]
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small
amount of power.
2
Open/close the sliding door (for iPod/iPhone)
3
Select the audio source
4
Basic playback control buttons
5
Adjust the volume (0(min) to 50(max))
6
Open/close the sliding door (for discs)
7
WPS pairing button (
>
9)
8
Headphone jack
Plug type:
‰
3.5 mm (
1
/
8
q
) stereo
Recommended plug type: Straight Plug
≥
To prevent hearing damage, avoid listening for
prolonged periods of time.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
9
Standby indicator
10 Wi-Fi
®
status indicator
11 Display
12 Sliding door
13 Remote control signal sensor
Distance:
Within approx. 7 m (23 ft) directly in front.
≥
To avoid interference, please do not put any objects in
front of signal sensor.
8
Top view
SC-HC57~RQT9708.book 5 ページ ２０１２年３月２日 金曜日 午後２時４分
