Panasonic SC-HC28DB, Руководство по эксплуатации, Страница: 13 / 20

13
RQT9731
[SC-HC28DB]
DAB/DAB+ reception is poor.
≥ Keep the antenna away from computers, televisions, other cables
and cords.
≥ Use an outdoor antenna ( l 5).
A beat sound or noise is heard while receiving
radio broadcast.
≥ Adjust the position of the antenna.
≥
Try to keep a certain amount of distance between the antenna and
AC mains lead.
≥
Try using an outdoor antenna if there are buildings or mountains
nearby.
≥
Switch the television or other audio players off or separate it from
this unit.
≥
Keep this unit away from mobile phones if the interference is
apparent.
Cannot charge or operate.
≥
Have you selected the appropriate selector?
Press [iPod] to select either “IPOD_DOCK” or “IPOD_PORT”.
≥
Check that the iPod/iPhone/iPad is connected properly. ( l 6)
≥ The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/
iPhone/iPad, and then operate again.
≥ Connect the iPod/iPhone/iPad again or try to restart the iPod/
iPhone/iPad.
≥ When this unit is in standby mode, charging will not start when
using the “IPOD_PORT” connection.
Turn this unit on and make sure the charging has started before
switching this unit to standby mode.
The remote control doesn’t work properly.
≥ The remote control and this unit are using a different code.
(
l 14, “REMOTE ”)
≥ Is the battery depleted or is the battery inserted incorrectly? ( l 4)
The following messages or service numbers may
appear on the unit’s display.
“--:--”
≥
You plugged the AC mains lead in for the first time or there was a
power failure recently. Set the time (
l 11).
“ADJUST CLOCK”
≥ Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
≥
Play timer is not set. Adjust the play timer accordingly.
“AUTO OFF”
≥
The unit has been left unused for about 30 minutes and will shut
down within a minute. Press any button to cancel it.
[SC-HC28DB]
“CHECKING CONNECTION”
≥ The unit is checking the connected iPod/iPhone/iPad.
≥ If this display keeps appearing, make sure that the battery of the
iPod/iPhone/iPad is not depleted and that the iPod/iPhone/iPad is
turned on and connected correctly (
l 6).
[SC-HC28DB]
“DOCK OPEN”
≥ Is the dock open? Close the dock completely to open the sliding
door.
“ERROR”
≥ Incorrect operation is performed. Read the instructions and try
again.
“F ” (“ ” stands for a number.)
≥
There is a problem with this unit.
Note down the displayed number, disconnect the AC mains lead
and consult your dealer.
“ILLEGAL OPEN”
≥ Sliding door is not in correct position. Turn the unit off and on
again. If this display appears again, consult the dealer.
[SC-HC28DB]
“IPOD_DOCK OVER CURRENT ERROR”
“IPOD_PORT OVER CURRENT ERROR”
≥ The iPod/iPhone/iPad is drawing too much power. Disconnect the
iPod/iPhone/iPad and turn the unit off and on again.
≥ The USB device is drawing too much power. Switch to “CD”
mode, remove the USB and turn the unit off.
“NODEVICE”
≥ [SC-HC28DB]
The iPod/iPhone/iPad device is not inserted correctly.
Read the instructions and try again ( l 6).
≥ [SC-HC28DB]
The battery of the iPod/iPhone/iPad is depleted.
Charge the iPod/iPhone/iPad and turn it on before connecting.
≥
The USB device is not inserted. Check the connection.
“NO DISC”
≥ Insert the disc to be played ( l 6).
Radio
≥
Confirm the antenna is properly connected. (
l
5)
[SC-HC28DB]
iPod/iPhone/iPad operations
Remote control
Messages
SC-HC28_18_EB~RQT9731-B.book 13 ページ ２０１３年１月３日 木曜日 午後８時２５分