Panasonic SC-EN35P, Руководство по обслуживанию

Страница: 60 / 73

Pin No. Mark I/O Function
1 PCONT1 O Power Control Output 1
(PWR Sply Active HIGH)
2 D5.3V_Ctrl O 5.3V Regulator Control
3 N.C. O No connection
4 LCD_DI O LCD Data Output
5 LCD_CE O LCD chip select
6 LCD_CLK O LCD CLK Output
7 LCD_INH I LCD lighting terminal
8 XM MUTE O XM Mute
9 I2S_RATE I XM I2S Rate
10 LINKACTIVE I XM Linkactive
11 MMOD (GND) I Memory mode selection
12 OSC2 (8MHz) O Main Oscillator output
(8MHz)
13 OSC1 (8MHz) I Main Oscillator input
(8MHz)
14 VSS - Micom GND
15 XI (32KHz) I Slow Oscillator input
(32KHz)
16 XO (32KHz) O Slow Oscillator output
(32KHz)
17 VDD33 - 3.3V
18 VDD18 - Internal Output (1.8V)
Connect to pin 37
19 NRST I MICOM RESET IN (L:
reset)
20 DAC RESET O XM DAC Reset
21 ANT_REV I XM Ant Rev
22 XM_RST O XM Reset
23 XM_PCONT O XM Pcont
24 DAB_TU_LOCKDET - No connection
25 REM_IN I Remote Control Input
26 HALT - No connection
27 D_DDOWFIC - No connection
28 DAB_IRQ - No connection
29 BLKCK I CD Subcode Block Clock
Input
30 VCCDET O VCC failure detect
(Active low)
31 CD_MDATA O CD LSI Command Data
32 STAT I CD LSI Status Input
33 CD_MCLK O CD LSI Command Clock
34 USB_SDA - No connection
35 USB_RST - No connection
36 USB_SCL - No connection
37 1.8V - Power supply (1.8V)
38 USB_REQ - No connection
39 VSS - Micom GND
40 ASP_CLK O ASP Sound Processor
Serial Clock Output
41 ASP_DATA O ASP Sound Processor
Serial Data Output
42 MLD O CD LSI command load
43 REST_SW I Reset SW (L: Inner)
44 CD_RST O CD LSI Reset Output (L:
reset)
45 MUTEA O Analog Mute Output (L:
Mute on)
46 CD_BOTTOM_SW I/O CD bottom switch
47 CD_TOP_SW I/O CD top switch
48 VOL_JOG 1 I JOG Input 1
49 VOL_JOG 2 I JOG Input 2
50 PLL_DO I/O PLL Data Output
Pin No. Mark I/O Function
51 PLL_DI O PLL Data Input
52 CD_SET1 - No connection
53 CD_SET2 - No connection
54 CD_SET3 - No connection
55 PLL_CLK I/O PLL clock
56 PLL_CE I/O PLL chip select
57 E_CS - No connection
58 E_DATA - No connection
59 E_CLK - No connection
60 MBP1 O Micro-P Beat Proof 1
61 MBP2 O Micro-P Beat Proof 2
62 CRTIMER I/O CR TIMER
63 VSS - Micom GND
64 LCD_RST - No connection
65 CLOSE_L O CD Tray Close Control
(Active L)
66 OPEN_H O CD Tray Open Control
(Active H)
67 DAB_RST - No connection
68 DAB_TU_RST - No connection
69 DAB_TU_SCL - No connection
70 DAB_TU_SDA - No connection
71 DBA_PCNT - No connection
72 XM_TX_OUT O XM System Control
Output (Micon to XM)
73 XM_RX_IN I XM System Control Input
(XM to MICON)
74 DAB_CLK/RDS_CLK - No connection
75 DAB_MODE - No connection
76 N.C. - No connection
77 N.C. - No connection
78 N.C. - No connection
79 N.C. - No connection
80 N.C. - No connection
81 N.C. - No connection
82 N.C. - No connection
83 N.C. - No connection
84 N.C. - No connection
85 N.C. - No connection
86 N.C. - No connection
87 N.C. - No connection
88 N.C. - No connection
89 VDD - Micom VDD+3.3V
90 N.C. - No connection
91 VSS - GND
92 KEY1 I Key 1 input
93 MM0D0 - No connection
94 TO_ERR - No Use
95 PDET2 I No connection
96 PDET1 I DC Level Detection Input
97 REGION I Region Setting Input
98 N.C. - No connection
99 VE_ERR - No connection
100 VREF+ - A/D Converter reference
v3.3V
19 Terminal Function of IC's
19.1. IC801 (MN101EF16ZXW) Servo Processor,Digital Signal
Processor/Digital filter and D/A Converter
60
SC-EN35P / SC-EN35PC