RQTV016
8
Listening to the secondary service
Press the [DAB SECONDARY] to select the secondary service.
“ ” is displayed if there is a secondary service broadcast.
The secondary services are selected each time the button is pressed. The primary
service is returned to after the last secondary service.
Display
Press [DISPLAY] to select the display.
The information scroll through the display.
Each time you press the button:
Dynamic label
(information about
the broadcast)
PTY display
(program type)
Ensemble label
(the name of the
ensemble)
Frequency display
Time display
Turning automatic clock adjustment function on
To adjust the time information during DAB broadcasting and automatic time
adjustment.
Press [DAB MENU] to enter menu mode.
Within 10 seconds, press [ALBUM or ] to select
“AUTO CLOCK ADJ.” and then press [ENTER].
Within 10 seconds, press [ALBUM or ] to select
“ADJUST ON” and then press [ENTER].
Select “ADJUST OFF” to turn the automatic clock adjustment function off.
To exit
Press [DAB MENU] again.
DAB Auto Scan
Press and hold [PLAY MODE] until “DAB AUTO SCAN” appears.
When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding
to the frequency is displayed for approximately 2 seconds.
Note
When updating memory with Auto scan, preset stations are not erased or changed.
When a frequency cannot be received, the previous memory is restored.
Total stations received is displayed for approximately 2 seconds.
•
•
•
Presetting
Presetting channel
Up to 20 channels can be set.
Press [
2
/
u
] or [
1
/
i
] to select a station.
Press [PGM, -AUTO PRESET].
Press the numbered buttons to select a channel.
To preset more stations, press [PLAY MODE] to select “STATION TUNE” and
then repeat steps 1 to 3.
Note
You cannot preset stations when the station is not broadcasting or when you are
selecting a secondary service.
Selecting a preset channel
Press [PLAY MODE] to select “PRESET TUNE”.
Press [
2
/
u
] or [
1
/
i
] or numbered buttons to select a channel.
DAB (continued)
DAB
DAB
DAB
DAB
DAB
DAB
DAB
6
➡
Page 2 for the position of remote control buttons.
SC-EN35 DBEB.indd 6
28/03/2007 14:20:15