background image

14

RQT0A53 (ENG)

Using a microphone or 
guitar

Preparation

Decrease the volume of the system to its 
minimum before you connect or disconnect a 
microphone or guitar.

By the unit only

1

Connect a microphone or guitar.

Plug type: 

 6.3 mm (

1

/

4

q

) monaural

When connecting a guitar, ensure to connect it to 
MIC 2/

 jack.

2

(Only when MIC 2/

 jack is connected) 

Push [

B

MIC

C

] to select the correct 

input setting.

Each time you push the button, the button position will 
switch between pushed-down and released positions.

3

Adjust the volume of the microphone or guitar.

For microphone 1: Turn [MIC1-VOL].
For microphone 2 or guitar: Turn [VOL-MIC2/

].

4

If you want to sing with the background music:
Play the music source and adjust the volume of 
the system.

To sing along with the Karaoke features, refer to 
“Karaoke”. (

l

right)

 

If a strange noise (howling) is emitted, move the microphone/
guitar away from the speakers, or decrease the volume of 
the microphone/guitar.

Set the microphone/guitar volume to “MIN”, and disconnect 
the microphone/guitar after use.

You can use Karaoke features such as vocal 
cancel, echo or key control.

Preparation

Get your microphone(s) and music source ready 
for singing along. (

l

left)

By the unit only

1

Set [

B

MIC

C

] to the released position 

(

B

MIC).

Each time you push the button, the button position will 
switch between pushed-down and released positions.

2

Turn on the Karaoke mode by pressing 
[KARAOKE] to select “ON KARAOKE”.

To cancel, select “OFF KARAOKE”.

3

Press [VOCAL CANCEL/ECHO/KEY-CON] 
repeatedly to show the current setting of vocal 
cancel, echo or key control.

4

(While the current setting is shown)
Press [

:

/

6

] or [

5

/

9

] to adjust the 

setting.

5

Start your Karaoke performance.

 

The Karaoke function will be canceled when:
– you turn on DJ jukebox.
– you set [

B

MIC

C

] to the pushed-down position 

(

C

).

– you switch off the system.

When a guitar is connected:
Ensure the button is at pushed-down position. 
(

C

)

When a microphone is connected:
Ensure the button is at released position. (

B

MIC)

Incorrect setting may cause the sound to be too loud or 
too soft.

This unit (rear)

Microphone

(not supplied)

Microphone or 
guitar 
(not supplied)

e.g.

Audio cable

(not supplied)

Karaoke

Vocal cancel

“OFF VOCAL CANCEL”, “VOCAL 
CANCEL”, “L” or “R”

Echo

 “ECHO OFF”, “ECHO 1”, “ECHO 2” 
or “ECHO 3”

Key control

“KEYCON-6” to “6”

The setting will return to “KEYCON 0” 
when you change to another source.

SC-CMAX5_PP~RQT0A53-Y_ENG.book  14 ページ  2015年6月12日 金曜日 午前10時23分

Содержание SC-CMAX5























Отзывы: