35
Referen
ce
VQT5F59
The TV screen turns black.
¾
When “24p Output” is set to “On”, HDMI
authentication takes place and a black screen
is displayed.
This unit does not recognize the USB
connection correctly.
¾
Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
¾
USB devices may not be recognized by this
unit when connected using the following :
j
a USB hub
j
a USB extension cable other than the
supplied with the Wireless LAN Adaptor
DY-WL5 (optional)
¾
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
The unit switches to standby mode.
¾
This unit will automatically turn to standby
mode after 20 minutes if it is inactive. (
>
15)
¾
When the time set for the sleep timer has
passed, the main unit will be turned off. (
>
9)
¾
One of the unit’s safety devices is activated.
Press [
Í
/I] on the main unit to turn the unit on.
The images from this unit do not appear on
the TV.
Picture is distorted.
Jittering occurs.
¾
An incorrect resolution is selected in “HDMI
Video Format”. Reset the setting as follows:
1
Turn the unit on.
2
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
j
“00rEt” is displayed on the unit’s display.
3
Press [
1
] (right) repeatedly on the remote
control until “04PrG” is displayed on the unit’s
display.
4
Press and hold [OK] for at least 5 seconds.
Set the item again. (
>
26)
j
When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD
®
audio are not output properly,
select “Yes” in “Default Settings” (
>
31) and
make proper settings.
¾
The unit and TV are using different video
systems.
1
Turn the unit on.
2
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
j
“00rEt” is displayed on the unit’s display.
3
Press [
1
] (right) repeatedly on the remote
control until “05Pln” is displayed on the unit’s
display.
4
Press and hold [OK] for at least 5 seconds.
The system switches from PAL to NTSC or
vice versa.
¾
PAL discs cannot be correctly viewed on an
NTSC TV.
¾
When “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
be output depending on the connection
method. After removing the disc from this unit,
select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (
>
27)
¾
If irregular colouring occurs on your TV, turn
the TV off for about 30 minutes.
If it persists, move the speakers further away
from the TV.
Picture
SC-BTT465&405&105EB-VQT5F59_mst.book 35 ページ ２０１４年１月２４日 金曜日 午後３時４４分
