Advanced
operations
41
VQT3Z99
∫
DivX Registration
You need this registration code to purchase and
play DivX Video-on-Demand (VOD) content.
∫
Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
∫
Adjusting speaker level
(Effective when playing multi-channel audio)
1
Select “Test” and press [OK].
A test signal is output.
2
While listening to the test signal
Press [
3
,
4
] to adjust the volume of
subwoofer (
).
The volume can be adjusted between
r
6 dB
to
s
6 dB.
3
Press [OK].
The test signal stops.
A
Test
To finish the speaker setting
Press [
3
,
4
,
2
,
1
] to select “Complete” and
press [OK].
Enjoying sound effects
from all speakers
For more details on each setting, refer to “Sound
Settings” on the Option menu. (
>
34)
1
Press [SURROUND].
2
While the mode is displayed
Press [
3
,
4
] to select the desired setting.
(
>
34)
∫
Adjusting speaker level during play
1
Press [CH SELECT] to activate the speaker
setting mode.
2
Press [CH SELECT] several times to select
the speaker.
≥
Press [
2
,
1
] to adjust the balance of the
front speakers.
3
Press [
3
] (increase) or [
4
] (decrease) to
adjust the speaker level for subwoofer.
s
6 dB to
r
6 dB
1
Press [SOUND].
2
Press [
3
,
4
] to select “2CH SOURCE” or
“ALL SOURCE”, and then press [OK].
e.g.,
3
While the selected mode is displayed
Press [
3
,
4
] to select the desired setting and
press [OK].
Repeat this procedure if necessary. (
>
34)
≥
The sound effects/modes may not be available or have no
effect with some sources.
≥
You may experience a reduction in sound quality when
these sound effects/modes are used with some sources. If
this occurs, turn the sound effects/modes off.
Speaker settings
dB
0
Complete
Test
R
L
0
dB
SW
Surround Effects
Sound Effects
SC-BTT282&182EB-VQTVQT3Z99_mst.book 41 ページ ２０１２年２月８日 水曜日 午前１１時８分
