Panasonic SC-ALL2GN Скачать руководство пользователя страница 31

Страница: 31 / 60

- 31 -

∫

Connecting a paired Bluetooth

device

Touch [

≥

[

] blinks slowly.

≥

If [

] lights, a Bluetooth

device is already connected with this unit.

Disconnect it. (

below)

Select “SC-ALL2” from the Bluetooth

device’s Bluetooth

menu.

Start playback on the Bluetooth

device.

∫

Disconnecting a Bluetooth

device

Touch and hold [

] for at least 2 seconds.

≥

[

] blinks slowly.

≥

If prompted for the passkey, input “0000”.

≥

You can register up to 8 devices with this unit. If a 9th device is paired, the
device that has not been used for the longest time will be replaced.

≥

This unit will automatically try and connect to the last connected Bluetooth

device.

≥

When the unit is selected as the AllPlay/DLNA speakers, the audio source will
change to the network.

≥

Bluetooth

cannot be selected as the audio source when the unit is waiting for

the WPS PUSH or WPS PIN code connection.

≥

This unit can only be connected to one device at a time.

≥

When enjoying video contents with this function, the video and audio output
may not be synchronised.

Содержание SC-ALL2GN





























































Результаты поиска

Содержание SC-ALL2GN

Отзывы:

Похожие инструкции для SC-ALL2GN

Бренды по названию

Популярные бренды

Panasonic SC-ALL2GN, Руководство по эксплуатации

Результаты поиска

Содержание SC-ALL2GN

Отзывы:

Похожие инструкции для SC-ALL2GN

Бренды по названию

Популярные бренды