10
R
Q
T9898
Preparing the media
Disc
1
Press [CD].
2
Press [
x
OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
3
Press [
x
OPEN/CLOSE] again to close the disc
tray.
USB
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
1
Decrease the volume and connect the USB device
to the USB port.
Hold the main unit when connecting or disconnecting
the USB device.
2
Press [USB] to select “USB A” or “USB B”.
USB status indicator lights up in red when selected.
Note:
Do not use a USB extension cable. The system cannot
recognise USB device connected through a cable.
Bluetooth
®
You can connect and play an audio device wirelessly
through Bluetooth
®
.
Preparation
• Switch on the Bluetooth
®
feature of the device and put
the device near the system.
• Read the operating instructions of the device for
details.
█
Pairing a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
Z
“Disconnecting a device”).
1
Press [ , MEMORY] (main unit:
[ /MEMORY, –PAIRING]) to select “BLUETOOTH”.
If “PAIRING” is shown, continue with step 4.
2
Press [PLAY MENU] to select “PAIRING”.
Or press and hold [ /MEMORY, –PAIRING] on the main
unit until “PAIRING” is shown. Continue with step 4.
3
Press [
Y
,
U
] to select “OK? YES” and then press [OK].
4
Select “SC-AKX58” or “SC-AKX38” from the
Bluetooth
®
menu of the device.
If prompted for a passkey, input “0000”.
The device connects with this system automatically
after pairing is complete.
The name of the connected device is shown for a few
seconds.
Note:
You can pair up to 8 devices with this system. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
█
Connecting a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
Z
“Disconnecting a device”).
1
Press [ , MEMORY] (main unit:
[ /MEMORY, –PAIRING]) to select “BLUETOOTH”.
“BLUETOOTH READY” is shown.
2
Select “SC-AKX58” or “SC-AKX38” from the
Bluetooth
®
menu of the device.
The name of the connected device is shown for a few
seconds.
3
Start playback on the device.
Note:
• A device must be paired to connect.
• The system can only connect to one device at a time.
• When “BLUETOOTH” is selected as the source, this
system will automatically try to connect to the last
connected device.
█
Disconnecting a device
1
Press [ , MEMORY] (main unit:
[ /MEMORY, –PAIRING]) to select “BLUETOOTH”.
2
Press [PLAY MENU] to select “DISCONNECT?”.
3
Press [
Y
,
U
] to select “OK? YES” and then press [OK].
“BLUETOOTH READY” is shown.
To cancel, select “OK? NO”.
Using the main unit
Press and hold [ /MEMORY, –PAIRING] until
“PAIRING” is shown.
Note:
A device is disconnected when you:
• Select a different source.
• Move the device out of the maximum range.
• Disable the Bluetooth
®
transmission of the device.
• Switch off the system or the device.
D.BASS
/
USB REC
A
B
PLAY
REC / PLAY
–SUPER WOOFER
USB device
(not supplied)
SC-AKX58.38 EB.GN RQT9898-L EN.fm Page 10 Monday, March 10, 2014 5:14 PM