5
Before using
RQT5321
B
C
A
R6, AA, UM-3
30
°
30
°
Concerning the remote control
Remote control
signal sensor
About 7 meters in front of
the signal sensor
Insert the batteries observing the correct polarities (
e
,
d
).
Transmission
window
A
B
Super woofer
Battery installation
Use of batteries
•
Align the poles (+ and –) properly when inserting the batteries.
•
Do not mix old and new batteries or different types of batteries.
•
Do not recharge ordinary dry cell batteries.
•
Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
•
Remove the batteries if the unit is not to be used for a long time.
•
Do not keep together with metallic objects such as necklaces.
•
Do not use rechargeable type batteries.
•
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
Operation notes
•
Do not place obstacles between the remote control signal sensor
and remote control unit.
•
Do not expose the remote control signal sensor to direct sunlight
or to the bright light of a fluorescent light.
•
Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
•
If this system is installed in a rack with glass doors, the glass
doors’ thickness or colour might make it necessary to use the remote
control a shorter distance from the system.
To prevent damage
•
Never place heavy items on top of the unit.
•
Do not disassemble or reconstruct the unit.
•
Do not spill water or other liquids into the unit.
Placement of speakers
Place the speakers so that the super woofer is on the outside.
C
Notes
•
Keep your speakers at least 10 mm away from the system for
proper ventilation.
•
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
•
To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
