20
How to checkup and service
Cleaning the drainage route
Request service periodically
(1-2 year intervals)
■
Defrosted water or condensation does
not drain through the proper channel
and is not discharged to the drainage
ditch if dust or dirt accumulates in the
drainage route.
As the result, defrosted water or condensation soaks into the body and this
causes “Degradation of the insulation performance”, that may result in
“Insufficient cooling” or a power leak due to damp electrical components.
Timing of cleaning differs depending on the structure of the product or
the installation environment.
Please consider this as a guideline.
■
For cleaning the drainage channel, consult the supplying dealer or the
technician.
Water tray
Wash with water once a month
■
Remove the water tray and remove any dirt with water.
After cleaning, install the water tray securely.
The water tray of model
SBC-P245K / SMR-P245
is installed at the rear side
of product.
The water tray of model
SBC-P729K / SMR-P729
SBC-P929K / SMR-P929
is installed inside the
machine room.
Do not clean the drainage
channel yourself.
Do not clean here
since it is dangerous.
_
WARNING
Prohibited
CMT-6-P110-113-00-0.indd 20
CMT-6-P110-113-00-0.indd 20
05/15/12 8:09 AM
05/15/12 8:09 AM
