Type
1 way, 2 speakers (Bass-ref.)
Speaker unit
Impedance 6
Full range
6.5 cm (2-1/2”) Cone type x 2
Input power (IEC)
220 W (Max)
Output sound pressure
level
82 dB/W (1.0 m)
Frequency range
110 Hz - 50 kHz (-16 dB)
140 Hz - 45 kHz (-10 dB)
Dimensions (W x H x D)
270 mm x 92 mm x 95.4 mm
10-5/8” x 3-5/8” x 3-3/4”
Mass
1.3 kg (2.9 lb.)
Notes :
1. Specifications are subject to change without notice. / Mass and
dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
System : SC-HT40P-S
Music Center : SA-HT40P-S
Front Speaker : SB-PF40P-S
Surround Speaker : SB-PS40P-S
Center Speaker : SB-PC40P-S
Subwoofer : SB-W40P-S
System : SC-HT40PC-S
Music Center : SA-HT40PC-S
Front Speaker : SB-PF40P-S
Surround Speaker : SB-PS40P-S
Center Speaker : SB-PC40P-S
Subwoofer : SB-W40P-S
System : SC-HT40EE-S
Music Center : SA-HT40EE-S
Front Speaker : SB-PF41GN-S
Surround Speaker : SB-PS41GN-S
Center Speaker : SB-PC40P-S
Subwoofer : SB-W40P-S
System : SC-HT40GN-
S
Music Center : SA-HT40GN-S
Front Speaker : SB-PF41GN-S
Surround Speaker : SB-PS41GN-S
Center Speaker : SB-PC40P-S
Subwoofer : SB-W40P-S
2005 Matsushita Electric Industrial Co. Ltd.. All rights reserved.
Unauthorized copying and distribution is a violation of law.
1. Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation of the
major printed circuit boards and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the
respective procedures.
Special reassembly procedures are described only when required.
2
