Panasonic SB-AKX880, Руководство по эксплуатации

Страница: 14 / 20

14
RQ
T0
A6
2
DJ sampler
(Except for AUX 1 and AUX 2 source)
By main unit only
By turning [MULTI CONTROL], you can apply a scratch
sound or sample sound to the track you are playing.
1
Press [DJ JUKEBOX/SAMPLER] to select
“SAMPLER”.
2
Press [
2
/
3
] or [
5
/
6
] to select the
desired sound.
3
Turn [MULTI CONTROL].
To cancel DJ sampler
Press [DJ JUKEBOX/SAMPLER] to select “OFF”.
Clock and timers
Setting the clock
This is a 24-hour clock.
1
Press [SETUP] to select “CLOCK”.
2
Press [
Y
,
U
] to set the time and then press [OK].
To check the time
Press [SETUP] to select “CLOCK” and then press [OK].
In standby mode, press [DISPLAY].
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select “OFF”.
To check the remaining time
Press [SLEEP].
Note:
•
The remaining time is shown for a few seconds every
minute. “SLEEP 1” is always shown when only 1 minute
remains.
• The play timer and sleep timer or the record timer and sleep
timer can be used together.
•
The sleep timer always comes first. Be sure not to set an
overlap of timers.
Play timer and record timer
(Except for Bluetooth ® , AUX 1 and AUX 2 source)
You can set the timer to come on at a certain time to:
• Wake you up (play timer).
• Record from the radio (record timer).
Play timer and record timer cannot be used together.
Preparation
Set the clock.
1
Press [SETUP] to select “TIMER ADJ”.
2
Press [
Y
,
U
] to select “
#
PLAY” or “
#
REC” and
then press [OK].
3
Press [
Y
,
U
] to set the start time and then press
[OK].
4
Do step 3 again to set the end time.
5
Press [
Y
,
U
] to select the source you want to play
or record and then press [OK].
6
For record timer, press [
Y
,
U
] to select “MEMORY”
or “USB B” to keep the recording and then press
[OK].
To start the timer
1
Prepare the source.
2
Press [SETUP] to select “TIMER SET”.
3
Press [
Y
,
U
] to select the setting and then press
[OK].
“
#
” is shown.
The system must be switched off for the timer to
operate.
To check the setting
1
Press [SETUP] to select “TIMER ADJ”.
2
Press [
Y
,
U
] to select “
#
PLAY” or “
#
REC” and
then press [OK].
In standby mode, press [DISPLAY] two times.
Note:
•
The play timer starts at a low volume and increases
gradually to the preset level.
• The record timer starts 30 seconds before the set time with
the volume muted.
• The timer comes on at the set time every day if the timer is
on.
•
If you switch off the system and then switch on again while
a timer is in operation, the timer will not stop at the end
time.
Using the “Panasonic MAX Juke” app
You can call up the tracks you want to play through the
app.
Play timer Prepare the source you want to listen
to (disc, USB, internal memory or
radio) and set the volume.
Record timer Connect the USB device to
USB B
(for
USB recording) and tune in to the
radio station.
PLAY ON Start the play timer.
PLAY OFF Cancel the play timer.
REC ON Start the record timer.
REC OFF Cancel the record timer.
SC-AKX660 E.GN RQT0A62-B En.fm Page 14 Tuesday, March 1, 2016 8:47 AM