Panasonic SB-AK450, Руководство по обслуживанию

Страница: 38 / 105

Step 3 Tilt the cassette mechanism unit in the direction of
arrow (1), and then remove it in the direction of arrow (2).
Step 1 Remove 2 screws.
Important notes: Ensure all the trays are in the “STOCK”
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in “STOCK” position,
please refer to (5.3 Setting the Tray In “STOCK” position
for CRS1 Service Manual order no. MD0509368C0)
Step 1: Press and hold the plunger lever and rotate the
gear as arrows shown until it stop.
Note: For disassembly of parts for deck mechanism unit,
refer to Section 10.16.
Step 2 Desolder wire at deck motor terminals.
Step 3 Remove Deck P.C.B.
Step 2: Push the traverse slide plate as arrow shown to
release the traverse unit.
Caution: Do not exert strong force on the traverse
slide plate.
10.14. Disassembly of Deck P.C.B.
·
Follow the (Step 1) - (Step 5) of Item 10.4
· Follow the (Step 1) - (Step 4) of Item 10.5
· Follow the (Step 1) - (Step 4) of Item 10.10
10.15. Disassembly of Traverse Unit
· Follow the (Step 1) - (Step 5) of Item 10.4
· Follow the (Step 1) - (Step 4) of Item 10.5
38
SA-AK450P / SA-AK450PC