Panasonic SA-XH201, Руководство по обслуживанию

Страница: 35 / 122

35
9.4. Error Code
9.4.1. Error Code Table 1
Error
Code
F61 The abnormalities
in the Power Amp
output or power
supply
In normal operation, when DCDET2 goes to
L, immediately PCNT is set to L (not normal
POWER OFF sequence), and Error Code
F61 is displayed, without displaying
‘GOODBYE’ scroll on the FL. When happen
error, it memorizes the contents and
displays unusual contents in self-diagnostic
error detection mode.
Press [OPEN/CLOSE]
on main unit for next
error.
F76 Abnormality in the
output voltage of
stabilized power
supply
In normal operation when DCDET1 is
detected L(Low) for two consecutive times,
F76 is displayed on FL for 1 seconds and
after that PCONT will be turned to L (Low).
Press [OPEN/CLOSE]
on main unit for next
error.
Diagnosis
Contents
Description of error Automatic FL Display Remarks
IPOD
OVER
CURRENT
Over current
occurs in Power
Supply for iPod
charging
Disc Region
In normal operation when IPOD_OC is
detected "L" (Low) for two consecutive
times, the message will display on FL once
and Power Supply to iPod shall be cut.
Power off the main unit
and power on again.
F0C1 DVD: Prohibited by the restricted region
code.
F0C3 DVD: Parental lock setting prohibits the
playback of the entire title.