13
TQ
B
M
03
6
0
Using the AUX IN input
You can change the input level etc. when you listen to
the audio from a portable audio player etc. connected to
AUX IN terminal.
Preparation
Connect the external equipment to AUX IN terminal.
You can adjust the input level.
1
Press [SOUND] repeatedly to select
“INPUT LEVEL”.
2
Press [
2
,
1
] to select “LOW” or “HIGH” and
then press [OK].
Note:
• The factory default is “HIGH”.
• Select “LOW” if the sound is distorted during “HIGH” input
level.
• Read the operating instructions of the external music
device for details.
• Components and cables are sold separately.
The system will automatically switch to AUX source
when it detects the signal from an external music device.
This function also works in standby mode.
1
Press [SETUP] repeatedly to select
“AUX-IN AUTO PLAY”.
2
Press [
2
,
1
] to select “ON” and then press [OK].
Note:
• The factory default is “OFF”.
• This function does not work when the volume of the
external music device is low, increase its volume.
• When the function is switched off and every time you
switch to AUX source, “AUX-IN AUTO PLAY IS OFF” will
be shown once.
• Stop or pause the external music device before you change
to other music source or to standby mode so as to prevent
the automatic switch to AUX source.
• When you use this function in standby mode, it may require
some seconds to be output the sound.
• If this function is set to “ON”, the standby power
consumption will increase. (Approx. 1.9 W)
Using the PC input
You can play back music on the PC with this system’s
speakers by connecting a PC to the PC IN terminal on
the main unit.
About supported format, refer to “Specifications” (
>
17).
(as of August 2018)
1
Disconnect the AC power supply cord.
2
Connect the main unit and a PC.
3
Connect the AC power supply cord to the main
unit and turn this system on.
4
Press [RADIO, EXT-IN] repeatedly to select “PC”.
5
Operate the PC for playback.
Note:
• When you play back high-resolution audio, it is
recommended that you use a compatible USB 2.0 High
Speed Cable.
Mac and OS X are trademarks of Apple Inc., registered in the U.S.
and other countries.
macOS is a trademark of Apple Inc.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
To adjust the input level
AUX-IN auto play
Before connecting to a PC
Follow the steps below.
• Refer to the following for the recommended OS
versions for your PC:
– Windows 7, Windows 8, Windows 8.1, Windows 10
– OS X 10.7, 10.8, 10.9, 10.10, 10.11
– macOS 10.12, 10.13
1
Download and install the dedicated driver to the
PC. (Only for Windows OS)
Download and install the driver from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
2
Download and install the dedicated app
“Panasonic Audio Player 2”
(free of charge) on
your PC. (For Windows OS and OS X)
Download and install the app from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
Listening to audio from a PC
USB
USB 2.0 cable
(not supplied)
Main unit (rear)
USB-DAC port
Type A
Type B
PC
SC-PMX90PC-TQBM0360_eng.book 13 ページ ２０１９年２月２１日 木曜日 午後１２時１３分
