38
9 Service Position
Note: For description of the disassembly procedures, see the Section 8
9.1.
Checking of Panel P.C.B.
Step 1 :
Remove Top Cabinet.
Step 2 :
Remove Front Panel Unit.
Step 3 :
Remove Panel P.C.B..
Step 4 :
Place Panel P.C.B. on a support block as shown.
Step 5 :
Connect 5P wire at connector (CN4300) on Main
P.C.B..
Step 6 :
Connect 21P FFC at connector (CN8001) on Main
P.C.B..
Step 7 :
Check Panel P.C.B. according to the diagram shown.
9.2.
Checking of SMPS P.C.B.
Step 1 :
Remove Top Cabinet.
Step 2 :
Remove Front Panel Unit.
Step 3 :
Remove Panel P.C.B..
Step 4 :
Remove SMPS P.C.B..
Step 5 :
Place Panel P.C.B. on a support block as shown.
Step 6 :
Connect 5P wire at connector (CN4300) on Main
P.C.B..
Step 7 :
Connect 21P FFC at connector (CN8001) on Main
P.C.B..
Содержание SA-PMX70EG
Страница 12: ...12 5 Location of Controls and Components 5 1 Main Unit Remote Control Key Button Operations ...
Страница 23: ...23 8 3 Main Parts Location Diagram ...
Страница 46: ...46 ...
Страница 48: ...48 ...