Panasonic SA-PMX1, Руководство по эксплуатации, Страница: 9 / 16

RQTV0154
9
Cassette tape
Basic play Basic play
1 Slide down the cassette slot cover.
2 Insert the cassette into the slot.
Forward side
3 Press [TAPE
2 3
] to start play.
Each time you press the button:
FWD PLAY
↔
REV PLAY
FWD PLAY : The forward side plays.
REV PLAY : The reverse side plays.
4 Press [PLAY MODE] to select the reverse mode.
BOTH SIDES ENDLESS ONE SIDE
BOTH SIDES : Both sides play. (forward reverse)
ENDLESS
: Both sides are played repeated until you press
[STOP
7
].
ONE SIDE : One side plays.
To Action
stop tape playback Press [STOP
7
].
start one-touch play Press [TAPE
2 3
] when the unit is OFF
with the cassette loaded.
fast-forward and
rewind Press [ /REW/
4
/
1
] or [ /FF/
¡
/
¢
]
in the stop mode.
eject tape Press [
0
] .
Note
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
TPS (Tape Program Sensor) TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [ /REW/
4
/
1
] or [ /FF/
¡
/
¢
] during play.
Play resumes from the track found.
Note
TPS may not function properly:
• with short silent parts
• when noise occurs between tunes
• if silent parts are found within tunes
Recording Recording
Use normal position tapes.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
Preparation
Wind the leader tape so that recording can begin immediately.
1
Insert the cassette to be recorded.
To switch the recording direction, press [TAPE
2 3
]
twice and then [STOP
7
].
2 Press [PLAY MODE] to select the reverse mode.
ONE SIDE : One side only records.
BOTH SIDES, ENDLESS : Both sides are recorded. (forward
reverse)
3 Select the source to be recorded.
Radio recording:
Tune in the station. (
➡
page 10)
Disc recording:
1
Insert the disc you want to record.
Press [CD
3
/
8
] and then [STOP
7
].
2
Prepare the desired disc recording mode.
To Action
record
programmed
tracks
Program the tracks you want. (
➡
page 8)
record
specific tracks Press [PLAY MODE] to select your
desired mode. (
➡
page 7)
4
Press [REC
¶
/
8
] + [TAPE] (main unit: [
¶
REC/
8
]) to
start recording.
Other basic operations Other basic operations
To Action
stop recording Press [STOP
7
].
stop recording
temporarily 1) Press [REC
¶
/
8
] + [TAPE] (main unit:
[
¶
REC/
8
]).
2) Press again to resume recording.
erase a recorded
sound 1) Insert the recorded cassette.
2) Press [TAPE
2 3
] and then [STOP
7
].
3) Press [REC
¶
/
8
] + [TAPE] (main unit:
[
¶
REC/
8
]).
Your attention is drawn to the fact that recording
pre-recorded tapes or discs or other published or
broadcast material may infringe copyright laws.
Erasure prevention Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side A Tab for side B
To re-record
Normal tape
Adhesive tape
PMX1_EB-En.indd 9 PMX1_EB-En.indd 9 5/31/06 5:45:36 PM 5/31/06 5:45:36 PM