14.3. Service Mode Table 1
Following modes are available with combinations of the pressed buttons on the player and on the remote controller unit.
Player
Remote controller
unit
Usage
button
0
Error code display (Refer to the item, 15.4. DVD Error Code Description)
5
Tilt adjustment
6
Area number and broadcasting system check
7
MICRO - P & Firmware Version.
DISPLAY
DVD laser drive current check
3
CD laser drive current check
PAUSE
Writing of laser drive current value after replacement of optical pickup
(Do use this function only when optical pickup is replaced.)
Initialization of the player (factory setting is restored.)
Used after replacement of micro-computer and its peripherals and printed circuit board.
14.4. DVD/CD Self-Diagnosis Error Code Description
Error Code
Meaning
Details
U. H. Error
U11
Focus servo failure
H01
Tray loading failure
H02
Spindle servo failure
(Spindle servo, DSC, SP motor, CLV servo failure)
H03
Traverse motor failure
H04
Tracking servo error
H05
Seek timeout failure
DSC system
F500
DSC failure
DSC stops due to servo failure.
(Startup, focus failure, etc.)
F501
DSC not Ready failure
Communication failure between DSC and system computer
(No communication because DSC does not move)
F502
DSC Time out failure
See F500.
F503
DSC communication failure
Communication failure (Result failure occurs after communication
command is transmitted.)
F505
DSC Attention Error
See F500.
F506
Invalid media
Disc is placed upside down; TOC is unreadable or invalid disc is inserted.
ODC system
F600
Unable to obtain control information due to form
recovery failure
Operation stops because navigation data cannot be obtained due to form
recovery system failure.
F601
Illegal sector ID requested
Operation stops because access of illegal ID data is requested.
F602
Unable to obtain LEAD IN due to form recovery
failure
Unable to read LEAD IN data
F603
Unable to obtain KEY DET due to form recovery
failure
Unable to obtain CSS data
F610
ODC failure
No permission of command issue
F611
No CRC OK appearing for a certain time
Unable to obtain seek address at CD system
F612
No CRC OK appearing for a certain time
Unable to obtain ID data at DVD system
Disc Code
F103
Ilegal highlight position
Disc standard is possibly illegal when highlight is displayed.
IIC Error
F4FF
Forced initialization failure (Time out)
Micro-computer Error
F700
MBX overflow
When replying a message to Disc Manager
F701
Unable to complete a message command
A message is issued before replying to Disc Manager.
F702
Change in a message command
A message is issued before replying to Disc Manager.
F880
Unsuitable task number
When a message arrives from not existing task
F890
A message is sent during AV task transmission
During transmission of a message to AV task
F891
Unable to transmit a message to AV task
When transmission of a message to AV task starts
F893
FROM altered
F894
EEPROM failure
F8A0
Unsuitable message command
When transmission of a message to AV task starts
25
SA-HT535E / SA-HT535EG
Содержание SA-HT535E
