Panasonic SA-BTT775GA, Руководство по обслуживанию

Страница: 15 / 173

15
4 Specifications
Main unit SA-BTT775GA/PU
O
GENERAL
Power supply: AC 110 V to 127 V,
AC 220 V to 240 V, 50/60 Hz
Power consumption: 85 W
Power consumption in standby mode:
0.1 W
iPod/iPhone Connector: DC OUT 5V 1.0A MAX
Dimensions (W
×
H
×
D): 430 mm
×
40 mm
×
279 mm
Mass (Weight): Approx. 3.0 kg
(Dimensions and Weight do not
include Speakers)
Operating temperature range: 0
°
C to 40
°
C
Operating humidity range: 35 % to 80 % RH
(no condensation)
O
AMPLIFIER SECTION
RMS TTL Power Output: 1000 W
1 kHz, 10 % total harmonic distortion
Front:
185 W per ch (3
Ω
)
Center:
180 W per ch (3
Ω
)
Surround:
125 W per ch (3
Ω
)
100 Hz, 10 % total harmonic distortion
Subwoofer:
200 W per ch (3
Ω
)
O
FM TUNER SECTION
Frequency range:
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals: 75
Ω
(unbalanced)
O
VIDEO SECTION
Signal system: PAL/NTSC (For GA)
NTSC (For PU)
Video output
Output level: 1.0 Vp-p (75
Ω
)
Output connector: Pin jack (1 system)
HDMI AV output
Output connector: Type A (19 pin)
This unit supports “HDAVI Control 5” function.
LASER Specification
Class 1 LASER Product
Wave length:
790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:
No hazardous radiation is emitted with the safety protection
O
TERMINAL SECTION
USB:
(Front)
USB Standard: USB 2.0 1 System
USB Port: DC OUT 5 V 500 mA Max
(Rear)
USB port for Wi-Fi:
Ready:
USB 2.0 1 System
DC OUT 5 V 500 mA Max
SD card slot: Connector: 1 system
Ethernet:
10BASE-T/100BASE-TX
1 system
Audio Input:
AUX: x1
Digital Audio Input:
Optical: x1
Sampling frequency: 32kHz, 44.1 kHz, 48 kHz
Audio Format PCM, Dolby Digital, DTS
WLAN
Antenna: Tx 1, Rx 2
Standard Complaince: IEEE802.11n / IEEE802.11a
IEEE802.11g / IEEE802.11b
Transmission System: MISO-OFDM system, OFDM
system, DSSS system
Transfer rate (Standard):
IEEE802.11n:
Tx Max, 150 Mbps, Rx Max.
300 Mbps
IEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b: Max. 11 Mbps
Access Mode: Infrastructure mode
Security: WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 Bit / 128 Bit)
(This unit supports WPA and
WPA2 encryption)
Note:
1. Specifications are subject to change without notice.
Solder:
This model uses lead free solder (PbF).
Refer to their respective original service manuals for *1.