Panasonic SA-BT235P, Руководство по обслуживанию

Страница: 12 / 144

12
4 Specifications
Main unit SA-BT235P
O
GENERAL
Power supply: AC 120 V,60 Hz
iPod/iPhone Connector: DC OUT 5V 500mA MAX
Power consumption: 90 W
Power consumption in standby mode:
Approx. 0.1 W
Dimensions (W
×
H
×
D): 430 mm
×
54 mm
×
287 mm
(16 15/16”X2 9/64”X11 5/16”)
Mass (Weight): Approx. 3.2 kg (7.1lbs)
Operating temperature range: 0
°
C to 40
°
C
(+32
°
F to 104
°
F)
(no condensation)
O
AMPLIFIER SECTION
DIN TTL Power Output: 310 W
1 kHz, 1.0 % total harmonic distortion
Front:
100 W per ch (3
Ω
)
100 Hz, 1.0 % total harmonic distortion
Subwoofer:
110 W per ch (6
Ω
)
O
AMPLIFIER SECTION
RMS TTL Power Output: 1000 W
1 kHz, 10 % total harmonic distortion
Front:
125 W per ch (3
Ω
)
Center:
250 W per ch (6
Ω
)
Surround:
125 W per ch (3
Ω
)
100 Hz, 10 % total harmonic distortion
Subwoofer:
250 W per ch (6
Ω
)
FTC TTL Power Output: 446 W
120 Hz to 20 kHz, 1.0 % total harmonic distortion
Front:
60 W per ch (3
Ω
)
Center:
106 W per ch (6
Ω
)
Surround:
60 W per ch (3
Ω
)
45 Hz to 120 Hz, 1.0 % total harmonic distortion
Subwoofer:
100 W per ch (6
Ω
)
Audio input
AUX x1
Digital audio input
Optical: x2
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: PCM, Dolby Digital
O
FM TUNER SECTION
Frequency range:
87.9 MHz to 107.9 MHz (200 kHz step)
87.5MHz to 108.0MHz (100 kHz Step)
Antenna terminals: 75
Ω
(unbalanced)
O
VIDEO SECTION
Signal system: NTSC
Video output
Output level: 1.0 Vp-p (75
Ω
)
Output connector: Pin jack (1 system)
HDMI AV output
Output format:
1080p/1080i/720p/480p
Output connector: Type A (19 pin)
HDMI (Deep Color,x.v.Color
TM
,
High Bit rate Audio )
This unit supports “HDAVI Control 5” function.
LASER Specification
Class
I
LASER Product
Wave length:
790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:
No hazardous radiation is emitted with the safety protection
TERMINAL SECTION
Ethernet:
10BASE-T/100BASE-TX
1system
SD card slot:
Connector : 1 system
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).