61
9.29. Replacement of Audio Digital
Amp IC (IC5300)
• Refer to “Disassembly of D-Amp P.C.B.”.
Step 1 Flip over D-Amp P.C.B..
Step 2 Desolder pins of the Audio Digital Amp IC (IC5300) on
the solder side of D-Amp P.C.B..
Step 3 Remove 1 screw.
Step 4 Remove TR Spring in the direction of arrow shown.
Step 5 Remove Audio Digital Amp IC (IC5300).
Caution: During replacement of the part, avoid touching
the heatsink, it may lead to injuries.
9.29.1.
Assembly of Audio Digital Amp IC
(IC5300)
Step 1 Mount the Audio Digital Amp IC (IC5300) on to D-Amp
P.C.B..
Step 2 Screw back TR Spring to hold the Audio Digital Amp IC
(IC5300) onto the Heatsink Power Unit.
Step 3 Solder the pins of Audio Digital Amp IC.
Step 4 Use a blower to remove the minute particles after the
screwing of TR Spring.
Caution: Ensure pins of the Audio Digital Amp IC (IC5300)
are properly seated and soldered on D-Amp P.C.B..
Содержание SA-AKX90PH
