20
8 Disassembly and Assembly Instructions
•
Illustration is based on SA-AKX800LM.
Caution Note:
•
This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
•
Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
•
During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
•
Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
•
During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
•
During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
•
Select items from the following indexes when disassembly or replacement are required.
•
Disassembly of Top Cabinet
•
Disassembly of Front Panel Unit
•
Disassembly of Panel P.C.B.
•
Disassembly of USB P.C.B.
•
Disassembly of Music Port P.C.B.
•
Disassembly of Rear Panel
•
Disassembly of Main P.C.B.
•
Disassembly of SMPS Module
•
Disassembly of Tuner P.C.B.
•
Disassembly of CD Mechanism Unit
•
Disassembly of CD Interface P.C.B.
8.1. Types of Screws
RHD30007-K2J
RHD30119-S
RHD26046
RHD30111-31
RHDX30005-J
RHDX031008