Panasonic SA-AK600GC, Руководство по обслуживанию

Страница: 42 / 134

Pin No.
Mark I/O Function
1 SD_IN I Tuner signal detect
input
2 MK_IN2 I/O Mech condition input
1
3 MK_IN1 I/O mech condition input
1
4 KEY2 I Key 2 input
5 KEY1 I Key 1 input
6 LM_SL I Level meter left
7 LM_SR I Level meter right
8 CHG_AD2 I Changer SW A-D
detection input 2
9 CHG_AD1 I Changer SW A-D
detection input 1
10 LM_L I Level meter left
11 LM_R I Level meter right
12 ST/DO/
SQCK I/O Tuner IF Data/Stereo
Input and CD Sub
Code Clock Output
13 STATUS I CD signal processor
status input (INV)
14 SUBQ I CD subcode data
output (INV)
15 MCLK/
PLLCK O Tuner PLL clock
output
16 MDATA/
PLLDA O tuner PLL data output
17 CNVSS - Flash Mode Terminal
18 /RESET - RESET Input
19 XCOUT - 32.768 kHz Sub Clock
20 XCIN - 32.768 kHz Sub Clock
21 VSS - Ground (0V)
22 XIN - 4.19 MHz Main Clock
23 XOUT - 4.19 MHz Main Clock
24 VCC - Power Supply (+5V)
25 PHOTO I Tape mecha
condition input
26 /CDRST O CD reset output
27 MLD/
PLLCE O CD command load
output/ Tuner PLL
chip enable
28 MILP O DDD latch pulse
29 RMT I Remote Control Input
30 BLKCK I CD block clock input
(Inverted)
31 DCDET I/O DC detect input
42