60
9.18. Disassembly of SMPS P.C.B.
• Follow (Step 1) to (Step 5) of Item 9.3
• Follow (Step 1) to (Step 6) of Item 9.4
• Follow (Step 1) to (Step 5) of Item 9.14
Step 1 :
Detach 11P wire at the connector (CN5802) on SMPS
P.C.B..
Step 2 :
Remove 4 screws.
Step 3 :
Lift up and remove the SMPS P.C.B. as arrow shown.
(This illustration shows is for PH only)
Step 4 :
Flip the SMPS P.C.B. and desolder the wire’s pin.
Caution: Red, Black, White, Blue wires.
(This illustration shows is for PN only)
Step 4 :
Flip the SMPS P.C.B. and desolder the wire’s pin.
Caution: Red, Black wires.
Caution : During assembly, ensure the SMPS P.C.B. is
seated properly at the locators.
Содержание SA-AK580PH
