Panasonic SA-AK220GCP, Руководство по обслуживанию

Страница: 29 / 104

Step 4 Unsolder the plunger terminals (2 points).
Step 5 Unsolder the motor terminals (2 points).
Step 6 Release the 2 claws (A), and then remove the Motor
P.C.B.
Step 7 Release the claw (B), and then remove the motor ass’y.
[Notice for motor ass’y installation]
1. Locate the name plate of motor to the traverse ass’y.
2. Align the hole of motor with the ribs.
10.8. Replacement for the pinch
roller ass’y and head block
· Follow the (Step 1) - (Step 2) of Item 10.2 - Disassembly of
Top Cabinet and Rear Panel
· Follow the (Step 1) - (Step 5) of Item 10.2.1 - Disassembly
for CD Lid
·
Follow the (Step 1) - (Step 2) of Item 10.3 - Disassembly of
the CD Mechanism Unit
· Follow the (Step 1) of Item 10.4 - Disassembly the Main
P.C.B. & Transformer P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.5 - Disassembly of
the Panel P.C.B. & Tact Switch P.C.B.
·
Follow the (Step 1) - (Step 5) of Item 10.6 - Disassembly for
the Deck Mechanism Unit & Deck P.C.B.
* The mechanism as shown below is for DECK1. For the
one of DECK 2, perform the same procedures.
Step 1 Release the 2 claws, and then remove the pinch roller
(R), (F).
Step 2 Release ther 2 claws, and then remove the head
connector.
29
SA-AK220GCP