Panasonic RXQ5M9W1B, Руководство по эксплуатации, Страница: 5 / 12

RXQ5~1 RXYQ5~1 REYQ8~16M8W1B(A) +
RXYSQ4~6M7V3B
VRVII and VRVII-S system air conditioner
4PW35761-1A
Operation manual
3
2. I
MPORTANT INFORMATION REGARDING THE
REFRIGERANT USED
This product contains fluorinated greenhouse gases covered by the
Kyoto Protocol.
Refrigerant type: R410A
GWP
(1)
value: 1975
(1)
GWP = global warming potential
Periodical inspections for refrigerant leaks may be required
depending on European or local legislation. Please contact your local
dealer for more information.
3. W
HAT TO DO BEFORE OPERATION
This operation manual is for the following systems with standard
control. Before initiating operation, contact your dealer for the
operation that corresponds to your system type and mark.
If your installation has a customized control system, ask your dealer
for the operation that corresponds to your system.
Outdoor units (See figure 1)
Names and functions of parts (See figure 1)
( figure 1 shows systems with changeover remote control switches.)
4. R
EMOTE CONTROLLER
Refer to the operation manual of the remote controller.
5. C
HANGEOVER SWITCH
: N
AME AND
FUNCTION OF EACH SWITCH
(See figure 2)
1 FAN ONLY/AIR CONDITIONING SELECTOR SWITCH
Set the switch to for fan only operation or to for heating or
cooling operation.
2 COOL/HEAT CHANGEOVER SWITCH
Set the switch to for cooling or to for heating operation.
6. O
PERATION RANGE
Operation range
Use the system in the following temperature and humidity ranges for
safe and effective operation.
7. O
PERATION PROCEDURE
■
Operation procedure varies according to the combination of
outdoor unit and remote controller. Read
"3. What to do before
operation" on page 3 .
■
To protect the unit, turn on the main power switch 6 hours before
operation.
■
If the main power supply is turned off during operation, operation
will restart automatically after the power turns back on again.
7.1. Cooling, heating, fan only, and automatic
operation
(See figure 3 and figure 4.1 )
■
Changeover cannot be made with a remote controller whose
display shows
(change-over under centralized control).
■
When the display (change-over under centralized control)
flashes, refer to "7.4. Setting the master remote controller" on
page 5 .
■
Automatic operation can be selected only for REYQ series.
■
RXQ series let you select fan only and cooling operation.
■
The fan may keep on running for about 1 minute after the
heating operation stops.
■
The air flow rate may adjust itself depending on the room
temperature or the fan may stop immediately. This is not a
malfunction.
Cool/heat
changeover
remote control
switch operation modes
Cooling only RXQ series
Heat pumps RXYQ series
❏
yes
❏
no
Heat pumps RXYSQ series
❏
yes
❏
no
Heat recovery series
Heat pumps REYQ series
❏
yes
❏
no
1 Outdoor unit
2 Indoor unit
3 Remote controller
4 Inlet air
5 Outlet air
6 BS (branch selector) unit
7 Cool/heat changeover remote control switch
RXQ5~10 RXYQ5~16 + REYQ8~16
COOLING COOLING HEATING
Outdoor temperature –5~43°C DB –5~43°C DB –20~21°C DB
–20~15.5°C WB
Indoor temperature 21~32°C DB 21~32°C DB 15~27°C DB
14~25°C WB 14~25°C WB
Indoor humidity
≤
80%
(*)
≤
80%
(*)
RXYSQ4~6
COOLING HEATING
Outdoor temperature –5~46°C DB
–20~24°C DB
(†)
(†) Range for operation: –20~–15°C WB. Range for continuous operation:
–15~15.5°C WB.
–20~15.5°C WB
Indoor temperature 21~32°C DB 15~27°C DB
14~25°C WB
Indoor humidity
≤
80%
(*)
(*) to avoid condensation and water dripping out the unit.
If the temperature or the humidity is beyond these conditions, safety devices may
work and the air conditioner may not operate.