
TIMER-OFF (release) ALARM ÿ zPLAY.
ÿ Tilt and select "TIMER ADJUST"
Master
5
press
3
2
Four
1
zPLAY
Use the awakening timer
Select source and
volume ÿ To play the
source and reserve
your favorite song (a page 16)
zREC
Select "TIMER-OFF". ¡ To
execute it again, select "TIMER-PLAY" and turn on the power.
¡
¡
Hey
Ma
Timer time setting (24-hour display)
Timer execution setting
ÿ Adjust the volume and
¡ The power turns on at the start time, plays the desired sound source (source), and turns off automatically at the end time. ¡ Once you
set the time, you can use it with a different source just by changing the source setting.
Preparation: ÿ Turn on
the power. ÿ Set the clock. (\ Page 10) Display
example: Play from 6:30 to 7:40.
Every time you press
Turn off the
power If you do not turn off the power,
the timer will not work.
ÿ CD / MD stops playing
Cut
it. To check the settings , press
and hold [ALBUM / GROUP SCAN-TIMER CHECK]. In the timer
setting procedure using an external device, press [P-MD / AUX]
on the remote controller to set it to “AUX”, and set the connected
device to operate at the same time as this unit.
To cancel the wake-up timer, turn on the
power and press [TIMER SET] on the remote control.
Awakening timer
Press
ÿ Press [ENTER] ÿ
Tilt and select “TIMER PLAY”
ÿ Press [ENTER]
ÿ Press [ENTER]
ÿ Press [ENTER]
Within 10
seconds
ÿ Tilt to match the start time
ÿ Tilt to match the end time
Select "TIMER-PLAY"
push
Use a timer
CD
MD
FM / AM
q / h
q / h
At the start time, it fades in (gradually increases) to the set
volume and plays. (“Z PLAY” flashes during operation) You
can play or record even after the timer is set . Be sure to
turn off the power after the operation. If you do not turn off
the power, the timer will not work.
43
RQT6953
RADIO
To make a mistake or change the settings To change
the time Turn on the power and change the source ÿ
Press [TIMER SET] and select “TIMER-OFF”. ÿ Do.
Remote control only
Timer time setting
ALARM zPLAY
(Timer not set is not displayed)
Timer execution setting
And turn off the power.
Information ¡ The wake-up timer and voicemail timer cannot
be set at the same time. ¡ Unless you cancel the timer, it will
operate at the same time every day. ¡ To set it at the same
time as the alarm timer, select “ALARM zPLAY” in step
4 .
3
Machine Translated by Google