background image

16

6.2.2.

Doctor Mode Table 2

The counter will increment by one.

When reach 9999999 will change to 

0000000

To check the FL segments display 
(All segments will light up)

FL Display Test

In Doctor Mode:
1. Press [AUTO OFF] on remote 
    control.
To cancel, press [0] on remote 
    control.
To exit, press [TAPE/OFF] on main 
uint.

To check for volume setting during 
this mode, Bass & treble is set to 
0dB & EQ is switch off.

Volume Setting

In Doctor Mode:
1. Press [7] on remote control.
To exit, press [TAPE/OFF] on main 
uint.

In Doctor Mode:
1. Press [8] on remote control.
To exit, press [TAPE/OFF] on main 
uint.

In Doctor Mode:
1. Press [9] on remote control.
To exit, press [TAPE/OFF] on main 
uint.

Item

FL display

Key operation

Mode name

Description

To determine the reliability of CD 
Loading unit.
To check for the Open/Close 
operation for the CD loading unit. 
It fails when there is abnormality 
in opening or closing.

CD Loading Test Mode 
(DLS6F)

In Doctor Mode:
1. Press [  10], [1], [1] on remote 
    control.
To exit, press [TAPE/OFF] on main 
uint.
(Refer to section 6.2.3. for more 
information).

To activate cold start upon next 
AC power up.

Cold Start

In Doctor Mode:
1. Press [SLEEP] on remote 
    control.
To exit, press [TAPE/OFF] on main 
uint.

The counter will increment by one.

When reach 9999999 will change to 

0000000

The counter will increment by one.

When reach 9999999 will change to 

0000000

To check for the traverse unit 
operation. In this mode, the first & 
last track is access & read. (TOC). 
It fails when TOC is not completed 
by IOS or the traverse is out of 
focus.

CD Traverse Unit Test 
Mode (DLS6F)

In Doctor Mode:
1. Press [  10], [1], [2] on remote 
    control.
To exit, press [TAPE/OFF] on main 
uint.
(Refer to section 6.2.4. for more 
information).

A combination of CD loading & 
traverse unit test.

CD Combination Test 
Mode (DLS6F)

In Doctor Mode:
1. Press [  10], [1], [3] on remote 
    control.
To exit, press [TAPE/OFF] on main 
uint.
(Refer to section 6.2.5. for more 
information).

The following shall be displayed 
for 2.5 secs. The result shall 
correspond to the condition met 
as shown.

Display of auto adjustment result

CD Self-Adjustment 
(AJST) Result Display

In Doctor Mode:
1. Press [  10], [1], [4] on remote 
    control.
To exit, press [TAPE/OFF] on main 
uint.

Содержание RX-D50EE































































































Отзывы: