Panasonic RX-D27E, Руководства

Страница: 68 / 84

Signal Generator or Sweep
Generator
Radio Dial
Setting
Indicator (Electronic
Voltmeter or
Oscilloscope)
Adjustment
(Shown in
Fig.1)
Remarks
Connections Frequency
Fashion a loop of
several turns of
wire and radiate
signal into loop of
receiver.
603 kHz
Point of non-
interference.(on/
about 600kHz)
Headphone Jack (32 )
Fabricate the plug as
shown in Fig.2 and then
connect the lead wires
of the plug to the
measuring instrument.
[*1] L4 ( AM
ANT Coil)
Adjust for
maximum
output.
Fashion a loop of
several turns of
wire and radiate
signal into loop of
receiver.
1503 kHz
Point of non-
interference.(on/
about 600kHz)
Headphone Jack (32 )
Fabricate the plug as
shown in Fig.2 and then
connect the lead wires
of the plug to the
measuring instrument.
CT1 (AM ANT
Trimmer)
Adjust for
maximum
output.
Fashion a loop of
several turns of
wire and radiate
signal into loop of
receiver.
450 kHz
Point of non-
interference.(on/
about 600kHz)
Headphone Jack (32 )
Fabricate the plug as
shown in Fig.2 and then
connect the lead wires
of the plug to the
measuring instrument.
T1 (AM IFT
Trimmer)
Adjust for
maximum
output.
Fashion a loop of
several turns of
wire and radiate
signal into loop of
receiver.
522 kHz
Point of non-
interference.(on/
about 600kHz)
Headphone Jack (32 )
Fabricate the plug as
shown in Fig.2 and then
connect the lead wires
of the plug to the
measuring instrument.
L7 (AM OSC
Trimmer)
Adjust for
maximum
output.
[*1] Fix antenna coil with wax after completing alignment.
FM-RF ALIGNMENT
Signal Generator or Sweep Generator Radio Dial
Setting
Indicator (Electronic
Voltmeter or
Oscilloscope)
Adjustment
(Shown in
Fig.1)
Remarks
Connections Frequency
Fashion a loop of
several turns of wire
and radiate signal
into loop of receiver.
106.1 kHz
Point of non-
interference.(on
/ about
600kHz)
Headphone Jack (32
) Fabricate the plug as
shown in Fig.2 and
then connect the lead
wires of the plug to
the measuring
instrument.
[*1] L5 ( FM
ANT Coil)
Adjust for
maximum
output.
[*1] Fix antenna coil with wax after completing alignment.
HEAD AZIMUTH ALIGNMENT
68