manualshive.com logo in svg
background image

RQT6744

7

Maintenance

Lens

Lens care

Clean the lens regularly to prevent malfunctions.
Use a blower to remove dust and a cotton swab
if it is extremely dirty.
Recommended product:
Lens cleaner kit (SZZP1038C).

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth

.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-
water solution or a weak detergent solution.

Never use alcohol, paint thinner or benzine to clean this unit.

Before using chemically treated cloth, read the instructions that came
with the cloth carefully.

Tape head care

Clean the heads regularly to assure good quality playback and  record-
ing.
Use a cleaning tape (not included).

(For United Kingdom)

(“EB” area code model only)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the re-
placement fuse has a rating of 5-ampere and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark 

m

 or the BSI mark 

o

 on the body of

the fuse.

If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replace-
ment cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured mark-
ings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the ter-
minal which is marked with the letter N or coloured Black or
Blue.
The wire which is coloured Brown must be connected to the termi-
nal which is marked with the letter L or coloured Brown or Red.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Caution for AC Mains Lead

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME
THEN THE FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13-AMPERE SOCKET.

WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL 

n

 OR COLOURED GREEN OR

GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Figure A

Figure B

Fuse
(5 ampere)

Fuse
(5 ampere)

Figure A

Figure B

Fuse cover

Using headphones 

(not included)

Turn down the volume and connect
the headphones to the [PHONES]
jack.

Plug type: 3.5 mm stereo

Note

Avoid listening for prolonged periods of
time to prevent hearing damage.

PHONES

~~

If this unit is not used for a long period of time or is used only
from an AC power source, remove all the batteries to prevent
potential damage due to possible battery leakage.

Align the poles (+ and –) properly when inserting the batteries.

Do not mix old and new batteries or different types of batteries.

Do not recharge ordinary dry cell batteries.

Do not heat or disassemble the batteries. Do not allow them to contact
flame or water.

Do not keep together with metallic objects such as necklaces.

Do not use rechargeable type batteries.

Do not use batteries if the covering has been peeled off.

Mishandling of batteries can damage other items, cause damage to the
unit, and may cause a fire through short-circuiting or electrolyte leakage.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part
of your body.

Use of Batteries

P5-7

11/20/02, 11:27 AM

7

Содержание RX-D21









Отзывы: