VQT2M18
35
Other
/
Symptom
Checkpoints
Playing
Playback speed is too fast or slow.
• You changed the playback speed (
➜
page 17).
The order of playing changed after
reloading files that were once imported
to the computer to this unit.
• This occurs because files imported from the computer are placed at the end
in the folder.
There is no sound from the earphones
or it is difficult to hear or noisy.
• Ensure the plug is inserted firmly.
• Wipe the plug clean.
The sound is distorted. There is a
noise at the beginning of sound.
• Please lower the microphone sensitivity (
➜
page 14) or keep more distance
from the recording sound source.
No sound from the speaker.
• There is no sound when you have connected earphones.
I hear noises.
• Move a mobile telephone away from this unit when you use the two in the same area.
Recorded sounds contain noise that
makes it difficult to hear sounds.
• Reduce noise (
➜
page 18). Noise is reduced and listening may become
easier.
Others
The power cannot be turned on.
• The batteries may have run out. Replace the batteries with the new ones (
➜
page 5).
The power automatically turns off.
• When you do not operate for more than approx. 15 minutes, the power automatically turns off.
When you slide the OPERATION/HOLD switch to “
OPR
” side, the power is turned on (
➜
page 6).
Cannot delete a file or folder.
• The file is protected (
➜
page 13).
• The folder is already empty.
• “
” (blinking) is displayed (
➜
page 12).
This unit is not recognised by a
computer.
• The OS on the computer may not be compliant with this unit (
➜
page 31).
• The password has been set (
➜
page 21).
• Are the batteries in this unit? If they are not, insert batteries.
• When the voltage of the batteries are too low, “
” is displayed
and the computer cannot recognise this unit (
➜
page 33).
4475AA'A'P836/AKPFF
4475AA'A'P836/AKPFF
ඦ೨
ඦ೨