Panasonic RR-XR800, Руководство по эксплуатации

Страница: 51 / 60

VQT3C56
51
Other
Symptom Checkpoints
Recording
Recorded sounds contain noise that
makes it difficult to hear sounds. • Move a mobile telephone away from this unit when you use the two in the same area.
• Set the “LOW CUT FILTER” to “ON”. Noise is reduced and listening may become easier. (
➜
page 17)
Recorded sound differs from the
actual sound. • Is Recording EQ (
➜
page 20) or “LOW CUT FILTER” (
➜
page 17) set?
Recorded sound is too loud or
too low. • Is the recording level adjustment set to manual? (
➜
page 18) If so, set the
proper recording level (
➜
page 19) or set the ALC setting to ON.
• Switch the microphone sensitivity. (
➜
page 17)
Playing
No sound from the speaker.
• There is no sound when you have connected earphones. (
➜
page 13)
Cannot hear any sound. • Adjust the sound volume. (
➜
page 12)
Cannot play the recorded file
though it was recorded on this unit. • The file name was changed. Only files named according to the file naming
rules can be played in folder MIC_A through MIC_D. Even if file names are
not changed, if some file numbers overlaps in the folder, those files cannot be
played. (
➜
page 41)
A file in the MIC_A to MIC_D or
LINE folder cannot be played.
Cannot play a file in the MUSIC
(M) folder, or the playback is not
correct.
• PCM (WAV) files recorded on this unit and MP3 files can be played on this
unit. Other file formats such as WMA and AAC cannot be played. Up to 199
of files in the MUSIC folder can be played. Transferred files exceeding the
maximum number cannot be played. If subfolders are created, number of files
playable is reduced by the equivalent number of subfolders created.
Playback speed is too fast or slow. • You changed the playback speed. (
➜
page 23)
I set the playback speed, however,
the file is played with 100 % speed.
• When the PCM playback starts after the playback of the speed-adjusted MP3
file finishes, the speed returns to 100 % speed. (
➜
page 23)
There is no sound from the
earphones or it is difficult to hear
or noisy.
• Ensure the plug is inserted firmly.
• Wipe the plug clean.